Foxboro P0904BH Industrial Control Module

The EcoStruxure™ Foxboro™ DCS Field Control Processor 280 (FCP280) is a distributed,

optionally fault-tolerant, field-installable controller module.

The FCP280 performs regulation, logic, timing, and sequence control with

connected Foxboro DCS Fieldbus Modules (FBMs).

It also performs data acquisition, alarm detection, and notification.

The FCP280. through a chassis-mounted network adapter, is connects to the Foxboro DCS

control network with standard fibre optic or 100 Mbps copper cable (see figure below).

The FCP280 requires Foxboro DCS Control Core Services Software v9.0 or higher.

A system with the FCP280 and this software is called an EcoStruxure Foxboro DCS Process Automation System.

FCM2F2 (RH914YZ), FCM2F4 (RH917JA) and FCM2F10 (RH916TQ)

Three models are available with nominal maximum substrate-to-substrate fibre optic

cabling distances: up to 2 km (1.24 mi), 4 km (2.48 mi) and 10 km (6.21 mi) respectively.

FCMs are mounted in pairs on standard baseboards for redundancy.

Non-redundant configurations require only a single FCM.

Fibre optic cabling is unaffected by electrical noise (EMI, RFI and lightning)

and is a versatile and highly reliable means of extending signal communications.

It can be used in areas containing equipment such as rotating machinery, arc welders, etc.

It can also be installed in cable bridges containing high voltage power lines,or in outdoor

areas exposed to lightning hazards.

or outdoor areas exposed to lightning hazards. Its electrical isolation features protect against

voltage differences and ground loops.

Johnson Controls TL-CCT-0 License enabling Controller

Johnson Controls MS-FCP-0 License enabling Metasys Equipment Controller

Johnson Controls MS-DIS1710-0 Local Controller Display

Johnson Controls WRZ-SST-120 Refer to the WRZ-SST-120 Wireless Sensing System

Johnson Controls WRG1830/ZFR183x Pro Series Wireless Field Bus System 

Honeywell 900RTI-0100 REDUNDANT SIL UIO REMOTE TERMINALPANEL  

Honeywell 900RTR-HO01 RELAY OUTPUT RTP 

Honeywell 900RTS-O0O1 RTP-DO, Dl, Al, UIO- 16 Channel Remote Terminal Panel

Honeywell 900S50-0360-00 I/O Scanner- 1 Port(1 per I/O rack) 

Honeywell 900S50-0460 I/O SCANNER(FOR REMOTE RACK) 

Honeywell 900S50S-0360-00 l/O Scanner-1 Port(1 per I/Orack)

Johnson Controls NS-ATV7003-0 Handheld VAV Balancing Tool

Johnson Controls NS Series Network Sensors 

Johnson Controls AS-CBLTSTAT-0 Cable adapter for connection to 8-pin TE-6700 Series sensors

Johnson Controls NS-WALLPLATE-0 Network Sensor Wall Plate

Johnson Controls WRZ Series Wireless Room Sensors 

Johnson Controls WRZ-7860-0 Refer to the WRZ-7860 Receiver