ABB NKTU02-007 I/O Module to Termination Module Cable

I/O Module to Termination Module Cable Manufacturers ABB

Bailey Model(s) ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information I/O Module to Termination Unit Cable, NKTU11-09

Connects I/O Module to Termination Unit, 09 feet long, non-PVC

Estimated Shipping Size Dimensions: 4.0" x 2.0" x 9.0" (10.2 cm x 5.1 cm x 22.9 cm)

Weight: 1 lbs 10.1 oz (0.7kg )

Tariff Code: 8544429000

Country of Origin: United States Ships from Webster NY, USA

I/O Module to Termination Module Cable

 AC010 provides for the control statements according to a simple

circuit diagram.

 Setup, storage, simulation and documentation are performed

using the compact and user-friendly AC010-PS001 software.

Software characteristics

 Display on a PC monitor according to DIN, ANSI

 Various languages to choose from

 Easy installation on all Windows operating systems

Technical data

Local and remote expansion modules.

Max. expansion: 24 inputs / 16 outputs

 Digital inputs

 2 analog outputs

 Relay outputs, 8 A max.

 Transistor outputs 0.5 A

 With or without display

Software characteristics

 Logical links

 Timing function

 Counter

 Timer with weekend function

 Real-time clock

 Compare functionality

Below is a side internal view of the EL mechanism and the associated anti-pumping component. 

When the opening pushbutton or coils are activated the opening shaft lever pushes down on point C of the anti-pump device.

This causes the device to side down slot D in direction of arrow B. 

Then the trigger portion A moves out from between the closing push-button and the closing shaft lever. 

So if the closing button or signal is held active and the opening button or signal is then activated.

The trigger A will pull out from between closing shaft lever and the closing push button. 

Once the open signal is released the trigger A will come to rest under the closing push-button and will 

not return between the closing shaft lever and closing push-button until the button or closing command is released.

The closing push button is operated by the closing coil (MC) directly by the shaft closing device.

This allows the anti-pumping device to prohibit closing by manual or electrical means.

You may need the following additional products：