ABB NKTU01-10 I/O Module to Termination Unit Cable

I/O Module to Termination Module Cable Manufacturers ABB

Bailey Model(s) ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information I/O Module to Termination Unit Cable, NKTU01-10

Connects I/O Module to Termination Unit, 10 feet long, non-PVC

Estimated Shipping Size Dimensions: 13.0" x 3.0" x 12.0" (33.0 cm x 7.6 cm x 30.5 cm) 

Weight: 1 lbs 11.1 oz (0.8kg )

Tariff Code: 8544429000

Country of Origin: United States Ships from Webster NY, USA

 I/O Module to Termination Unit Cable

Symphony Plus Control & I/O BRC410

ƒ Performance increase depends on specific

function blocks used, but in general

performance of latest module (BRC410)

compared with older modules:

ƒ ~ 10x vs. MFP01/02/11/12

ƒ ~ 4x vs. BRC100/200

ƒ Enhanced On-Line Configuration provided

by BRC410

ƒ BRC410 also provides ModBus TCP

ƒ BRC410 support 30,000 block addresses

and 4,000 Modbus TCP/IP points

ƒ Infi90 Modulebus support*

ƒ Downloadable firmware 

Application areas of 086349-002 BB 41055 stepper linear control motherboard:

Distribution automation applications:

Automatic reclosing: A circuit breaker used for automatic reclosing tripping to handle instantaneous faults.

Automatic recovery: The 086349-002 BB 41055 stepper linear control motherboard isolates faults through a patented load transfer scheme and restores

Distribution capacitor control algorithm: more effectively utilize existing capacitor banks to achieve peak cycles.

Fault location: locate and isolate faults to reduce customer downtime.

Load and dead bus transmission: Monitor the substation network and transfer the load of overloaded transformers to other substations.

Load shedding/limiting: Provide intelligent load shedding conditions during overload.

Data recording/storage applications:

SOE local recorder: Record digital and analog SOEs to an external printer, PC, or CSV file.

Accumulator freeze: Coordinate the freeze of the accumulator group.

Event storage: Stores a historical record of the current value, status, and timestamp, and can store up to 7 days of simulation and accumulator data.

Historical simulation: stores the average historical value of 8 additional analog inputs.

Features and benefits

Termination for up to eight (8) analog I/O process signals within a horizontal row.

All SD I/O modules & bases of all types (Singular or Redundant) AND (Compact or Full-size), are

100% fully compatible with each other. Thus, Singular & Redundant, Compact or Full-size I/O

modules can be mounted within a single, common HN800 I/O bus.

Optional mechanical keying can be implemented to prevent insertion of the wrong I/O module type.

Latching device on the base locks the base into position on DIN-Rail.

Industry standard 35-mm DIN rail, Horizontal row mounting.