ABB NKHS13-20 Hydraulic Servo Cable

Hydraulic Servo Cable Manufacturers ABB, Bailey Model(s)

ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information Cable for connecting IM/SPHSS03/04/05/13 Module to NTHS03 Termination Unit, 20 Feet, Non PVC

Estimated Shipping Size Dimensions: 10.0" x 2.0" x 11.0" (25.4 cm x 5.1 cm x 27.9 cm)

Weight: 5 lbs 0.0 oz (2.3kg )

Hydraulic Servo Cable

The action time of this unit is an inverse time limit characteristic. Dirt phase protection is an independent unit which will operate with a fixed delay of 600s when the phase sequence is wrong.

The unbalance and inverted phase protection units can be independently selected or withdrawn, e.g. the inverted phase unit can be withdrawn from use when the motor is allowed to operate in reverse phase sequence, so that there is no risk of the motor being damaged by a reversal of phase sequence.

In this case there will be no tripping due to motor reversal. The low-current unit is used for out-of-load protection of motors.

The unit is particularly suitable for equipment cooled by a constant flow of liquid, e.g. submersible pumps, where the cooling capacity of the motor is reduced when the flow is interrupted.

In this case the motor circuit will be tripped by the low current unit detecting the well. The start time totaliser is another measure to control the number of starts in a given period of time.

Key features

• Unlimited phone support 365 days a year with access to ABB product experts

• On-site troubleshooting dispatch prioritization

• Proactive maintenance programs (Performance Review)

• Availability of field labor and spare parts (discounted hourly rates and prices)

• Access to ABB University training programs (reduced fees)

• Product Lifecycle management

• Control upgrade solutions designed to extend the life of the system

800xA for Symphony Plus Harmony communicates with the control systems  through a Cnet-to-computer interface (IET800. PNI800).

800xA for Symphony Plus Harmony is a distributed process management and  control system.

Using a series of integrated Harmony control units, the system  allows monitoring and control of process variables such as flow rate,

temperature,  and pressure according to a control configuration that the engineer or technician  defines.

A Harmony control unit is a controller and its I/O devices connected for  communication on control network (Cnet).

800xA for Symphony Plus Harmony operates in a Windows environment on  personal computer hardware.

Using interactive process graphics, the operator can  monitor and control all Analog loops and Digital devices interfaced to the network  through Harmony control units.

800xA for Symphony Plus Harmony provides maintenance personnel with the  capability to globally monitor

the operating status of any system component on the  network, and to diagnose component failures from any workstation.

800xA for Symphony Plus Harmony also provides the Harmony Executive Service.

It is an 800xA service that controls underlying 800xA for Symphony Plus Harmony  services.