MVME162-512A Motorola Embedded Controller

The MVME162FX series provides an ideal platform for embedded monitoring applications for OEMs and solution developers.

It enables OEMs to minimize engineering costs while integrating value-added hardware and software applications into off-the-shelf products.

To provide a wide range of solutions, the MVME162FX allows the use of a variety of MPUs,

memory and interface options such as floating point, Ethernet, SCSI and VME.

As a result, the MVME162FX variants best fit the application requirements.

Functional Features

- Optional Processor:

- 32 MHz MC68040 Enhanced 32-bit Microprocessor with 8KB Cache and MMU and FPU

- 25 MHz MC68LC040 Enhanced 32-bit Microprocessor with 8KB Cache and MMU

- A32/D64 VMEbus Master/Slave Interface with System Controller Function

- High performance DMA support for VMEbus D64 and local bus memory burst cycles

- 4. 8 or 16MB of shared DRAM

- 512KB SRAM with battery backup

- 1MB Flash for on-board monitor/debugger or user-installed firmware

- 8K x 8 NVRAM and time clock with battery backup

- Two serial communication ports, console port is EIA-232-D DCE, second port is user configurable to EIA-232-D/EIA-422 (V.36) DTE/DCE

- Four 16-bit or two 32-bit IndustryPack® ports, one DMA channel per port

- Six 32-bit timers (four without VMEbus) and watchdog timer

- Optional SCSI bus interface with 32-bit local bus burst DMA

- Optional Ethernet transceiver interface with 32-bit local bus DMA

- One 32-pin PLCC EPROM socket

- Four-stage requester, seven-stage interruptor, and seven-stage interrupt handler for VMEbus

- Remote reset/pause/status control functions

- On-board debugger and diagnostic firmware