MService targets two main application scenarios:
Customer’s staff can use the device for performance analysis and continuous support of
maintenance planning for MNS and MNS iS system, with MService installed as permanent part of the switchgear.
ABB’s service personnel uses the device to place it in a customer’s switchgear to
support customer decisions in keeping the switchgear in good condition by collecting
data for a certain time and derive an assessment on the switchgear performance and operational status.
To fit to these scenarios, the MService employs a small-scale, compact approach to enable fast
commissioning and ease of use.

Fieldbus
MLink can include Fieldbus communication to DCS. The type of Fieldbus must be selected
before ordering the MLink type. The Fieldbus specific information (PROFIBUS, MODBUS etc.)
can be found in the following documents:
MNS iS Interface Manual Profibus
MNS iS Interface Manual Modbus
MNS iS Interface Manual Profinet IO
Supported Functions
MService Condition Monitoring covers the following main functions:
Collection of operational data of the supervised modules
Collection of all alarms and trips generated in the supervised modules
Collection of maintenance warnings derived from additional assessment logic related to the supervised modules.
Display of the MNS or MNS iS system structure highlighting modules signaling problems
Display of historical data in trend displays
Detailed information on the identification, location, and type of supervised modules
Online supervision of temperature or power loss related problems within individual cubicles.
MService can supervise all modules in MNS and MNS iS, which are connected to the internal
switchgear communication bus.
SST WOODHEAD CANADA 490-1655 Printed Circuit Board Card
SST-PFB-SLC Woodhead Profibus Scanner Module
SST Woodhead 5136-DNP-PCM-S T PCMCIA Devicenet Interface
Woodhead SST-CCS-PCU CC-Link Communications Card CCS-PCU1 U40
Woodhead 3095-002 Super-Safeway Outlet Box 3 Phase Cord Set 20AMP 120/208VAC
SST/Woodhead 5136-DNP-104 Interface Module DeviceNet I/O Driver
SST/Woodhead Profibus Network Interface PB3-ISA-e GEB
Woodhead SST-IBS-CLX, Interbus Scanner Module, G4 Master.
AMAT AMAT-DNP-CPCI- 1 DEVICENET PRO PCB CARD SST WOODHEAD
WOODHEAD / MOLEX SST-DN3-PCU-2E PCI DEVICENET v 1.4.0
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved