ABB LXN1604-6 3BHL000986P7000 Power Supply Module

The DO802 is an 8 channel 110 V d.c./250 V a.c. relay (NO) output

module for the S800 I/O. The maximum voltage range is 250 V and

the maximum continuous output current is 2 A. Al outputs are

individualy isolated. Each output channel consists of optical

isolation barrier, output state indication LED, relay driver, relay and

EMC protection components.

The relay supply voltage supervision, derived from the 24 V

distributed on the ModuleBus, gives a channel signal error and a

module warning signal if the voltage disappears. The error signal and

warning signal can be read through the ModuleBus. This supervision

can be enabled/disabled with a parameter.

Features and benefits

• 8 channels for 110 V d.c. / 250 V a.c. relay Normaly Open (NO) outputs

• 8 isolated channels

• Process connection via detachable connectors

The DO801 is a 16 channel 24 V digital output module for the S800

I/O. The output voltage range is 10 to 30 volt and the maximum

continuous output current is 0.5 A. The outputs are protected

against short circuits, over voltage and over temperature. The

outputs are in one isolated group. Each output channel consists of a

short circuit and over temperature protected high side driver, EMC

protection components, inductive load suppression, output state

indication LED and optical isolation barrier.

ACSM1-04 drives provide speed,torque and position control for

demanding applications. They can control induction, synchronous

and asynchronous servo and high torque motors with various feedback

devices. The compact hardware, different variants and programming

flexibility ensure optimum system solutions.