Emerson EPXMBE101 Modbus TCP Dual LAN Network Adapter, 2 Cu RJ45 Ports

Reduces installed cost of system: DeltaV Electronic Marshalling helps reduce overall system costs by

eliminating internal cabinet cross wiring, reducing overall footprint, simplifying I/O channel assignments, and

reducing Factory Authorized Testing activities. Electronic Marshalling provides separation between I&E hardware

installation schedules and control strategy development.

Wiring can begin earlier knowing any late changes can be done without lifting a wire. Separation of the

controller and I/O allows more efficient cabinet designs and accommodates late scope changes you can add I/O

anywhere. Adding additional control capacity does not require re-wiring I/O. Simply assign the control modules

and their I/O signals to the new controller, without lifting a wire.

Introduction

DeltaV™ Electronic Marshalling delivers a new level of control system I/O performance with unprecedented

flexibility and ease of use. The CHARM I/O card (CIOC) supports up to 96 individually configurable channels and

is designed specifically for multi-core home run cables in centrally located marshalling cabinets. It can also be

installed in field junction boxes to further reduce system design and installation costs. All communications are

completely redundant from the channel (CHARM) to the DeltaV controller.

Product Description

Electronic Marshalling hardware includes:

„ CHARM I/O Carrier (DIN rail-mounted and supports redundant pair of CHARM I/O Cards, redundant 24

V DC power connectivity, and redundant Ethernet communication modules).

„ CHARM I/O Card (CIOC) provides communication between CHARMs and the Ethernet I/O network to

M-series, S-series, and PK Controllers. The CIOC has Achilles Communications Certification Level 1 and the

redesigned CIOC2 has more computing power and Achilles Communications Certification Level 2. The CIOC2

is a drop-in replacement for the CIOC (v13.3.1 or later is required).

„ CHARM Base plate (DIN rail-mounted with interleaving power and bus connectors. Supports 12 CHARMs and

their terminal blocks, as well as connection for injected field power).

„ CHARM Terminal Block (removable terminal block providing terminal connections to field wiring and

physical latch for CHARM).

„ CHARMs (Characterization Module for each field signal.Provides basic analog to digital conversion and signal

isolation to the redundant communication bus).

„ Cable Extenders that provide flexibility in carrier mounting.

„ I/O bus termination (provides bus terminations for redundant I/O bus).

„ Labeling features for baseplate and channel identification.

Recommended Products P/N：

Single Carrier Extender Cable 0.8m (31in) KJ4003X1-BH3

Single Carrier Extender Cable 1.1m (43in) KJ4003X1-BH1

Single Carrier Extender Cable 1.5m (58in) KJ4003X1-BH4

Single Carrier Extender Cable 1.9m (77in) KJ4003X1-BH5

Power Terminal Plug for 2-Wide and 8-Wide Carriers KJ4005X1-BF1

Power Buss Plug for 8-Wide Carriers KJ4005X1-BG1

Power Terminal Plugs for 2-Wide and 8-Wide Carriers; package of 8 plugs SE6197

Power Buss Plugs for 8-Wide Carriers; package of 8 plugs SE6198

S-series FOUNDATION™ Fieldbus I/O

S-series H1 I/O Interface Card and Terminal Block

(includes 1 Interface Card and a simplex Terminal Block) SE4017P0

Redundant S-series H1 I/O Interface Card and Terminal Block

(includes 2 Interface Cards and a redundant Terminal Block) SE4037P0