GE DS215SLCCG4AZZ01A LAN Communication Card

Part Number DS215SLCCG4AZZ01A Manufacturer General Electric Country of Manufacture As

Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability 

DS215SLCCG4AZZ01A is a LAN Communication Card and it contains software PROMPTs

SSLC card is located in L1 in R, S, T, C, D cores in Mark V Control systems.

SSLC contains both isolated and nonisolated circuits for communications to the driver (or) excitor;

the SSLC features a 16-position Alpha-Numeric display that connects to the programmer module.

The SSLC LAN control processor (LCP) software in EPROMs U6 and U7 cannot be configured in the field

and these are replaceable and can be moved from one board to another board.SLCCG4 & FW.

Analog Output (AO)

The hardware analog output is primarily used as a process input to the controller programs,

but it can also be used a diagnostic output for various signals used in the tuning and

debugging process. The Analog Common pin is used for the signal return. The Analog

Output (AO) software parameter allows you to configure this output to represent one of the

following signals:

• Actual velocity (AO = VLA)

• Actual output current (AO = CMD)

• Following error (AO = FE)

The output can also be forced to a specific voltage value by setting the AO parameter to the

desired voltage from a program, PC terminal emulator, or Motion Developer terminal

window. The analog Output value can be queried in the terminal window using the “?” command.

Use 20-28 AWG twisted-pair wire with an overall shield for this signal interface. For best

noise immunity connect the shield to the Analog Common pin on the Auxiliary I/O connector.

The internal schematic for the analog output circuit is shown below.

We have the same series of models in stock. 

If you don't find the model you need, please contact us and we will provide you with an official quotation！