Autronica Repeater panel BU-BV-420G2

BS-420MG is a maritime gas alarm control panel with full

operation capabilities. All gas alarm handling and system

features can be controlled and monitored from the panel. Note

that the panel cannot be used for detection of fires.

The panel communicates with other system units on the

Ethernet-based local area network, AutroNet. The maximum

number of system units supported by AutroNet depends on the

type of system. In a standard system the maximum number is 64.

The panel can accommodate up to a maximum of 12 I/O

modules. All modules are easily plugged onto each other on a

standard mounting rail inside the unit.

The panel serves as an operating panel for one or several

defined operation zones.

The panel provides connections for 2 Ethernet ports and 2 USB

host ports.

The panel is menu operated on a 16-line display, with 40

characters per line. A printer is available as an option.

The Controller Rack Unit BC-440 serves as a connection unit for

the detection loop, alarm sounders, controls and inputs. It is a

variant of the BC-420 Controller prepared for rack installations.

Together with the IO modules the unit will have the full

functionality of the BC-420 Controller.

The Controller is equipped with 2 Ethernet ports, one

AutroFieldBus port and one serial port. The Controller

communicates with other system units using the Ethernet

based local area network, AutroNet and external equipment

using AutroCom and Modbus.

The serial port may be set to RS-232/422 or 485 and can

communicate with external equipment using AutroCom,

Modbus, NMEA and ESPA 4.4.4.

The BS-200 is an integrated fire alarm control panel for small to

medium sized installations. The panel serves as a stand-alone panel. A

maximum of 8 additional panels can be freely mixed and connected to

the Fire Alarm Control Panel via the RS-485 Panel Bus, including

Repeater Panels BS-211. Information Panels BV-210. Fire Brigade Panels

BU-210 and Mimic Drivers BUR-200.

All alarm handling and system features can be configured, controlled

and monitored from the panel.

The standard panel is prepared for two detection loops, but it can

accommodate up to a maximum of four detection loops using the loop

extension pack BSD-200A/PACK*. The loops support most of AutroSafe

detectors, several types of I/O devices for monitored outputs, open

collector outputs, galvanic isolated inputs and monitored inputs. It has

a 5A power module for battery charging.

The panel is menu operated on a 8-line display, with 40 characters per

line.

The Operator Panel (BS-210), which is an integrated part of the BS-200

panel, can also be mounted separately outside the cabinet.

The BUR-200 is a Mimic Driver hat is capable of driving 32 LEDs

with series resistors on a mimic panel for additional indication of

alarms. In addition, 8 standard monitored inputs can be used to

reading various switches.

The Mimic Driver is connected to the RS-485 Panel Bus.

Power redundancy is achieved by using a daisy chain connection

with master and slave drivers.

Repeater Panel BS-211 is identical (with the exception of an 

alphanumeric keypad) to the operator panel BS-210. which is an

integrated part of the Fire Alarm Control Panel BS-200. All alarm

handling and system features can be controlled and monitored

from the panel. Configuration is not possible.

The BS-211 panel communicates with the Fire Alarm Control

Panel BS-200. information Panels BV-210. other Repeater

Panels BS-211. Fire Brigade Panels BU-210 and Mimic Drivers

BUR-200 on an RS-485 panel bus.

BV-210 informationspanelet monteres på Autroprime BS-200 ABA

-centralens RS485-bus og kan kommuni- kere med eksterne paneler

af følgende typer:

Repeaterpaneler BS-211. andre informationspaneler BV-210.

Brandmandspaneler BU-210 og Mimikdrivere BUR-200.

B&R 3AM050.6 2005 analog mixed module

B&R 4PP035.0300-01 Operation Panel PLC Module

X20AI4622 B&R X20 analog input module

B&R X20CM0985 brand Programmable Logic Controller Module X20CM0985

X20AI4632 B&R 4 analog inputs ±10 V or 0 to 20 mA

Brand X20IF10G3-1 B&R Programmable Logic Controller Module X20IF10G3-1

B&R X20CP3585 brand PLC Module X20CP3585

B&R Compact CPU Module X20CP0411 Controll Unit Module X20 CP0411

Delivery Quickly B&R plc 3AT660.6

B&R 2005 Modules • Temperature Modules • AT660

B&R X20CP1684 CPU Module

B&R 7XX419L.50-1 brand Programmable Logic Controller Module 7XX419L.50-1

X20IF1030 B&R PLC Controller Module

B&R X20 SO 6300 PLC Module

B&R X20CP1382 brand Programmable Logic Controller Module X20CP1382

B&R X20CP1486 controller

B&R 3AI775.6 PLC Module

X20DC2395 B&R PLC module

B&R X20AO2632 PLC Module X20 AO 2632

B&R 8B0C0320HW00.002-1 Power Supply Module

B&R X20IF10E3-1 PLC Module X20 IF10E3-1

X20AT4222 | B&R X20 Series Temperature Module