Autronica BS-211 REPEATER PANEL

Repeater Panel BS-211 is identical (with the exception of an

alphanumeric keypad) to the operator panel BS-210. which is an

integrated part of the Fire Alarm Control Panel BS-200. All

alarm handling and system features can be controlled and

monitored from the panel. Configuration is not possible.

The panel is intended for the following purposes:

 Read information on events

 Accept events

 Read events in the log

The panel is menu operated on a 8-line display, with 40

characters per line.

The BS-211 panel communicates with the Fire Alarm Control

Panel BS-200. information Panels BV-210. other Repeater

Panels BS-211. Fire Brigade Panels BU-210 and Mimic Drivers

BUR-200 on an RS-485 panel bus.

Indicators

 8 x 40 character alphanumeric display

 Alarm, More alarms, Pre-alarm, Remote call, Remote

condition, Test condition, System fault, Power, Delayed

activation, Annunciator disabled, Remote call disabled

 Internal buzzer

The BS-200 is an integrated fire alarm control panel for small to

medium sized installations. The panel serves as a stand-alone panel. A

maximum of 8 additional panels can be freely mixed and connected to

the Fire Alarm Control Panel via the RS-485 Panel Bus, including

Repeater Panels BS-211. Information Panels BV-210. Fire Brigade Panels

BU-210 and Mimic Drivers BUR-200.

All alarm handling and system features can be configured, controlled

and monitored from the panel.

The standard panel is prepared for two detection loops, but it can

accommodate up to a maximum of four detection loops using the loop

extension pack BSD-200A/PACK*. The loops support most of AutroSafe

detectors, several types of I/O devices for monitored outputs, open

collector outputs, galvanic isolated inputs and monitored inputs. It has

a 5A power module for battery charging.

The panel is menu operated on a 8-line display, with 40 characters per

line.

The Operator Panel (BS-210), which is an integrated part of the BS-200

panel, can also be mounted separately outside the cabinet.

These complete Autroprime fire detection units are

specifically designed for the maritime market. They are

delivered as two different variants:

 Autroprime Maritime fire detection unit delivered as

a cabinet

 Autroprime Maritime fire detection unit delivered as

a mounting plate for mounting inside a bridge

console

Both variants provide change-over for mains/emergency

with battery backup and the following inputs/outputs:

 1 Emergency Ventilation Stop Accommodation

 1 Emergency Ventilation Stop ECR

 1 Door Holder Magnet

 1 Common Fault to AMS

 1 Common Alarm to AMS

 1 Power Failure to AMS

 1 Spare Power Failure Output

 1 Output to Light Column ECR

 2 Sounder Bell/Horn (230V AC)

 1 Fire Alarm No Delay (PA)

 1 Fire Alarm 2 Min. Delay (PA)

 2 Inputs Sig from PA System

Beskrivelse

Alle systemhændelser og al alarmhåndtering kan

overvåges fra informationspanelet BV-210. De

vigtigste hændelser og tilstande vises automa-

tisk i informationspanelets 8 × 40 karakters store

og letlæselige display.

BV-210 informationspanelet monteres på Autroprime

BS-200 ABA-centralens RS485-bus og kan kommuni-

kere med eksterne paneler af følgende typer:

Repeaterpaneler BS-211. andre informationspaneler

BV-210. Brandmandspaneler BU-210 og Mimikdrivere

BUR-200.