The power supplies can only be installed into slots PS1 (power supply #1) and PS2 (power supply #2). If
redundant power supplies are not needed, blanking plates must be installed in the slots not being used.
Branch circuit fuses, circuit breakers, and wiring must meet appropriate codes and authorities having
jurisdiction for the specific country (CE, UL, etc.). See Table 4-3 for maximum recommended fuse or
breaker ratings. Do not connect more than one main power supply to any one fuse or circuit breaker. Use
only the wire sizes specified in Table 4-3. which meet local code requirements.
Time delay fuses or circuit breakers must be used to prevent nuisance trips.

Power requirements depend on the number and type of modules supplied for each system. For a system
with a single I/O chassis, size the input power source according to the rating of the MicroNet Plus power
supply to which the source is connected. Do not size the supply mains for the sum of the MicroNet Plus
power supply ratings when redundant supplies are used. MicroNet Plus supplies are redundant when
installed in the same chassis. Redundant supplies share the load between them equally, but each must
provide for full load in the event that one of the units is disabled. Table 4-3 gives the maximum overload
protection for supply mains connected to any single or redundant pair of MicroNet Plus main power
supplies. It is not recommended that both MicroNet Plus main power supplies of a redundant pair be
connected to a single source, since failure of that source would disable the system.
| SST / WOODHEAD 5136-PFB-VME PROFIBUS INTERFACE CARD 5136PFBVME NIB |
| WOODHEAD SST-DN3-PCU-2( E) PCI DEVICENET INTERFACE CARD DN3-PCU-2(E) V1.2.8 |
| Brad Communications / Fanuc / Woodhead. SST-PFB3-VME-1 -E. |
| SST/Woodhead 5136-DNP-104 Interface Module DeviceNet I/O Driver |
| SST/Woodhead Profibus Network Interface PB3-ISA-e GEB |
| Woodhead SST-IBS-CLX, Interbus Scanner Module, G4 Master. |
| AMAT AMAT-DNP-CPCI- 1 DEVICENET PRO PCB CARD SST WOODHEAD |
| WOODHEAD / MOLEX SST-DN3-PCU-2E PCI DEVICENET v 1.4.0 |
| Woodhead SST PB3-PCU-E V1.7.1 PB3-PCI-e Communication Card |
| SST WOODHEAD CANADA 490-1655 Printed Circuit Board Card, REV: 1.1.0, 94V-0 |
| SST-PFB-SLC Woodhead Profibus Scanner Module |
| SST Woodhead 5136-DNP-PCM-S T PCMCIA Devicenet Interface |
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved