IBA ibaLink-SM-64-SD16 System Interface for SIMADYN D/16 bit Systems

Product specifications

Description

The ibaLink-SM-64-SD16 board serves as the direct optical interface between the

SIMADYN D automation system and the ibaPDA/ibaScope process data acquisition sys

tem or the ibaLogic automation system.

The ibaLink-SM-64-SD16 board features an optical bidirectional channel that can transmit

64 analog and 64 binary signals simultaneously in both directions in one millisecond.

The connection to ibaPDA/ibaScope or ibaLogic is carried out by connecting ibaFOB-4i or

ibaFOB-io PC interface boards.

The board can be directly installed in a SIMADYN D rack and behaves there just like a

standard SIMADYN D board.

Driver

Driver 1: CS3 for STRUC version 3:

This variant acts like a CS3 MMC communication board with the following properties:

 The board can only be used in sub-racks with C-bus connection (i. e. SR12 or

SR24. or SR1 and SR5. respectively)

 The board can only communicate with P16 processor modules that have the C-bus

connection, i.e. not with the technology processors (e.g. PG16. PG26. PS16.

PT20/G/M)

 The board features a dual-port RAM (DPR) with a memory capacity of 16 KB

 The MMC "COMNET" protocol is used as the communication protocol. All data is

exchanged, including initialization tasks and monitoring functions, according to this

protocol.

Driver 2: CS12 for STRUC version 4:

This variant acts like a CS12 fiber-optic interface module with the following properties:

 The board can only be used in sub-racks with C-bus connection (i.e. SR12 or

SR24)

 The board can also communicate with P32 processor modules. The P32 proces

sors are all equipped with a C-bus connection

 The board features a dual-port RAM (DPR) with a memory capacity of 32 KB

 The CIP3 protocol is used as the communication protocol. All data is exchanged,

including initialization tasks and monitoring functions, according to this protocol

Regardless of the variants of the drivers and the STRUC-version, the board is well em

bedded in the SIMADYN D environment:

 Data is exchanged in SIMADYN D with standard modules.

 The board is initialized with a standard central module.

 SIMADYN D and the iba system connected can be switched on and off fully inde

pendent of each other. SIMADYN D can also run without the iba system connected

and visa versa

 The execution cycle in the ibaLink-SM-64-SD16 is 1 ms

Note

The iba FOB-SD interface board is available for STRUC V4/P32 systems for transmitting

large data volumes with optional access; this PC interface board communicates with the

SIMADYN D CS12/13/14 interface module.