GE 8755-CA-NS EBIM carrier

PAC8000 delivers full-specification performance in a broad range of harsh process environment conditions; extreme

temperatures, humidity or corrosives and conditions subject to shock and vibration. 

In ATEX environments, PAC8000 also excels. 

All components can be installed and maintained in Zone 2/Division 2 hazardous areas. 

The I/O includes modules that can be connected directly to Intrinsically Safe (Exi) or Increased Safety (Exe) field wiring. 

PAC8000 provides comprehensive diagnostic data on controllers, Bus Interface Modules (BIM), 

I/O modules, field wiring and field instruments, allowing users to respond to issues quickly and effectively.

PAC8000 Controllers are used in conventional distributed control architectures, with the I/O modules connected directly to the Controllers. 

The same I/O modules may be used in remote IO architectures.

Benefits of PAC8000 Controllers

• Controller Options PAC8000 Controllers include a Process Controller featuring DCS style function block programming, 

a Logic Controller with 61131-style PLC programming, and a Hybrid Controller that provides the capabilities of both. 

An RTU Controller is also available, providing DNP3 communication. 

The SIL 2 SafetyNet Controller is also part of the PAC8000 family.

• I/O Modules A broad range of PAC8000 I/O modules are available to meet the needs of different applications.

All modules provide comprehensive diagnostic information. 

Analog and discrete output modules are typically 8-channel, with 8-, 16- or 32-channel discrete input modules. 

Up to 64 modules can be mounted on each node.

• Environmental and Hazardous Area Operation PAC8000 can go where other products cannot.

They can be field mounted and will operate under the following conditions: 

• -40°C to +70°C operating range

• ISA Level G3 corrosive atmospheres • 30g shock and 5g vibration

• Class I, Division 2 and Zone 2 hazardous areas, with I/O field wiring including intrinsically safe (Exi) and increased safety (Exe) options.

The IS220PTCCH1A is a thermocouple input manufactured by General Electric for use within the Mark VI/Mark VIe systems. 

These systems were some of the later Speedtronic controls system technology systems developed and

released by General Electric for the management and control of gas, hydro and steam industrial turbine systems. 

The Mark VIe Series that this IS220PTCCH1A Thermocouple Input Module belongs to must be considered a decently-strong step up 

from the Mark V Turbine Control System Series even, given the fact that the Mark V Series has a more-restricted set of specific 

applications in steam and gas turbine automated drive assembly settings alone. 

While this is true, this IS220PTCCH1A device's greater Mark V Turbine Control System Series is still definable as 

one of the lastly-developed GE Mark product series to make use of the patented Speedtronic control system technology as mentioned above, 

while increases its overall market desirability by itself.