ABB 66378300 Bus Monitoring Module

Bus Monitoring Module Manufacturers ABB, Bailey Model(s)

ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information Bus Monitoring Module for use with IEPEP03, IEPEP04 and NPEP05.

Estimated Shipping Size Dimensions: 7.0" x 2.0" x 10.0" (17.8 cm x 5.1 cm x 25.4 cm)

Weight: 0 lbs 9.0 oz (0.3kg )

Tariff Code:  8504409540

Country of Origin: United States Ships from Webster NY, USA

Bus Monitoring Module

The Harmony OPC server provides OPC

connectivity between devices on the INFI-Net

control network and OPC client applications. In

non-redundant and redundant configurations,

it can be used in conjunction with ABB products

such as DataLink and popular non-ABB products

such as OSIsoft PI System and Aspen InfoPlus.21.

HR Series ICI800 Ethernet CIU provides Ethernetbased communication between INFI-Net and

the system’s engineering tools, HMI and the

Harmony OPC server for connection to thirdparty applications. As per NERC CIP-007-2

R5, SSL certifications authenticate its

connections with interface applications, further

safeguarding the integrity and privacy of the

ICI800 communication path.

Applications

The binary input board 23BE40 performs the following processing functions for different types of signals:

 Digital filtering to suppress contact jumping

 Suppression of technically induced chattering signals

 Intermediate position suppression and double indication monitoring

 Consistency check of all binary input channels assigned to digital measurement values

The 23BE40 has a buffer for temporarily storing 50 time-stamped event messages in chronological order, designated for transmission to the communication unit.

The board's microcontroller handles all time-critical tasks for the parameterized processing functions.

In addition, it communicates interactively with the RTU560 system bus.

All configuration data and processing parameters are transmitted via the RTU560 system bus.

All configuration data and processing parameters are loaded from the communication unit via the RTU560 bus.

The board is equipped with a serial interface to the RTU560 system bus.

During initialization and operation, the board performs a series of tests. If a fault occurs, it is reported to the communication unit.

All fault conditions affecting the board's functionality are indicated as general fault signals by means of light emitting diodes (ST).

Faults in the board are detected by the communication unit.