Emerson Ovation 1C31142G01 Contact Input

PK Controller: Now Supporting Native PROFINET

PROFINET is an open industrial Ethernet solution and is based on international standards. 

It is a communication protocol designed to exchange data between controllers and devices in an industrial automation network.

And now, both the innovative PK Controller and new PK Flex Controller support native PROFINET, 

helping customers enhance their performance and meet the requirements of most of their time-critical applications.

You do not need special hardware or configuration to use PROFINET; 

the PK Flex Controller and PK Controller are equipped with PROFINET capability.

„ PK Flex Controller is a PROFINET controller and will connect with up to 250 devices such as PLCs, Drives,Remote I/O, transmitters and valves.

„ PROFINET in the PK Flex Controller is compliant with version 2.3 and CC-A functionality.

The Ovation I/O modules are locked into base units. These base units are housed in

the Controller cabinets where they are mounted on DIN rails and wired to the appropriate field devices.

The standard modular components typically consist of the following:

• Electronics module

• Personality module

• Base Unit (containing the field terminations)

The relay output modular components consist of the following:

• Electronics module

• Base Unit (containing the field terminations)

Two H1 interfaces can be mounted in adjacent slots using the 2-wide redundant terminal block. 

The DeltaV controller recognizes the presence of redundancy and presents both cards as a single pair within the system. 

There is no additional user configuration required to set up the redundant H1 hosts. 

Segment Power is provided using third party Ff power supplies that also provide segment physical layer diagnostics. 

The H1 interface segment wires connect to these power conditions while a separate segment trunk wire connects to the field devices

Our Business

Emerson’s industry-leading portfolio enables us to identify and confront the challenges of an 

increasingly complex and unpredictable marketplace from a position of strength, 

driving near- and long-term value as a trusted partner for our customers.

The FOUNDATION Fieldbus H1 interface is packaged in a small form factor enclosure and installs on any I/O slot of the S-series horizontal carriers. 

The interface uses a separate terminal block to which the segment wires are connected. 

A single interface is used with the 1 wide terminal block in a simplex installation. 

Recommended Products P/N：

Emerson Ovation 5X00105G10 Control Board

Emerson Ovation 5X00105G03 Control Board

Emerson Ovation 5X00105G01 Control Board

Emerson Ovation 1C31234G01 Contact Input Module

Emerson Ovation 1C31142G01 Contact Input

Emerson Ovation 5A22727G03 Consumables Kit

Emerson Ovation 1C31129G03 Analog Output Card

Emerson Ovation 5A22727G02 Consumables Kit

Emerson Ovation 4D33942G02 Chassis/Metalwork/Fan

Emerson Ovation 4D33942G01 Chassis/Metalwork/Fan

Emerson Ovation 1X00377H01 Cable Management Bar

Emerson Ovation 5A26141G05 Cable Controller to Transition Panel

Emerson Ovation 5A26137G04 Cable

Emerson Ovation 5X00111G01 Cabinet Power Distribution Kit

Emerson Ovation 3A99419G06 Cabinet Ground Cable

Emerson Ovation 3A99419G03 Cabinet Ground Cable

Emerson Ovation 1C31129G04 Analog Output w/o Diagnostics