A-B 1747-RM001 SLC 500 Instruction Set Reference Manual

Review Power Requirements

Review the power requirements of the modules drawing power from the chassis power supply.

1. The fixed 2-slot chassis supports 2 1746-INT4 modules. If combining an

INT4 module with a different type of module, refer to Considerations for a

Fixed Controller in Chapter 3 of the user manual.

2. For a modular system, compute the total load on the system power supply

using the procedure described in the SLC Installation and Operation Manual

for Modular Controllers (publication number 1747-UM011) or the SLC 500

Family System Overview (publication 1747-SO001).

Unpack the Module

Unpack the module making sure that the contents include:

• module (catalog number 1746-INT4)

• factory-installed removable terminal block with CJC sensors attached

(catalog number 1746-RT32)

• this Quick Start document (publication number 1746-QS002B-EN-P)

If the contents are incomplete, contact your local Rockwell Automation representative for assistance.

DH-485 channel offers:

• configurable isolation via the 1747-AIC or 1761-NET-AIC interfaces.

• maximum network length of 1219 m (4000 ft).

• RS-485 electrical specifications.

• Belden 9842 or Belden 3106A cable connection between nodes (daisy-chain connection).

Powerful Modeling Engine

The power of FactoryTalk Analytics LogixAI comes from a modeling engine that is targeted for industrial manufacturing use cases. 

It empowers control engineers to deploy machine learning with ControlLogix® as the execution engine 

and ControlLogix tags as the primary data source. 

It transforms streaming controller data into calculated predictions at the high speeds required for process critical control. 

The predicted operational values can be used in place of a manual reading or in a place where it’s not possible to deploy a traditional sensor or instrument. 

Operations teams can use the predictions to improve quality, increase yield, increase asset utilization and home in on specific learnings for their operational excellence journey.

A modern control system is more than its name implies. It delivers the fast system performance, 

high capacity and optimized productivity that you need from a control system today.

Our ControlLogix® and GuardLogix® 5580 family of controllers use the Studio 5000® design 

environment as the standard framework that optimizes productivity, reducing time to commission. 

This framework manages Integrated Motion over EtherNet/IP for high-speed motion applications and SIL2/PLd and SIL3/PLe safety solutions. 

You may also need the following related products：