Key Features
The 5701 Series Control System is part of the 57 System family and is designed to monitor and control field installed industrial gas detectors.
The key features of the system are as follows.
Provides up to 16 gas detection channels in a standard 19'' subrack using a 3U card format.
Provides up to 8 gas detection channels in a 3U card format in a half 19'' subrack.
Racks are available for both front and rear wiring.
Simple field connection for wires up to 2.5mm2.
Single channel operation mode for high integrity systems.
Channel control cards are removable and do not interfere with other wiring.
Catalytic bridge or 4 - 20mA input.
Optional alarm switching relay output.
Multi-alarm modes for master, zone and voting alarms.
UP, DOWN, STEL and LTEL / RATE alarm outputs.
Update alarms for single or multi-channel alarms.
Remote inhibit and reset inputs.
Relay output on and/or off delay.
Selectable 0 - 20mA or 4 - 20mA isolated monitor outputs.
Easy calibration and operation with dedicated engineering card.
EMC compliant.
Field interface/relay cards provide interface connections between the control card and the respective field-connected gas sensors. In addition, relay cards provide alarm outputs for field connections.
General
The power converter modules DCS800-S have the protection class IP00 and are to be mounted in a cubicle or finger protected area.
There are different sizes (D1. D2. D3. D4. D5. D6. D7), graduated in terms of current and voltage ranges.
All units are equipped with the DCS800 Control Panel.
It can be snapped into place on the power converter module or installed in the switchgear cubicle door by means of amounting kit.
Accessories such as external fuses, line reactors etc. are also available, to complete the drive system.
All converter modules up to 525 V and 1000 A (D1...D4) are equipped with field exciters.
The power section of the converters is available as single (2-Q) bridge or double (4-Q) bridge. 4-Q drives are required for regenerative breaking.
4-Q drives can be built by:
–Double (4-Q) armature bridge or –Single (2-Q) armature bridge plus a double (4-Q) field converter bridge
The bridge type has an influence on the maximum output voltage of the converter. See table below.
A-B 1746-BTM Module Rockwell SLC Temperature Control |
A-B 1746-FIO4I module Rockwell SLC analog combination |
A-B 1746-FIO4V module Rockwell SLC analog combination |
A-B 1746-HCA Module MOT Module Cable Communication Test |
A-B 1746-HSCE Module Rockwell SLC Analog Combo |
A-B 1746-HSCE2 Module Rockwell SLC Analog Combination |
A-B Single Axis 1746-HSTP1 Stepper Controller Module |
A-B 1746-IA16 module Rockwell SLC 16 digital input |
A-B 1746-IA8 Module Rockwell SLC 8 digital inputs |
A-B 1746-IA8 Module Rockwell SLC 8 digital inputs |
A-B 1746-IB16 module Rockwell SLC 16 digital input |
A-B 1746-IB32 module Rockwell SLC 32 digital input |
A-B 1746-IB8 Module Rockwell SLC 8 digital inputs |
A-B 1746-IC16 module Rockwell SLC 16 digital input |
A-B 1746-IG16 Module Rockwell SLC 16 Digital Inputs |
A-B 1746-IH16 module Rockwell SLC 16 digital input |
A-B 1746-IM16 module Rockwell SLC 16-point digital input |
A-B 1746-IM4 Module Rockwell SLC 4 digital inputs |
A-B 1746-IM8 module Rockwell SLC 8 digital inputs |
A-B 1746-IN16 Module Rockwell SLC 16-point digital input |
A-B 1746-INT4 Module Rockwell SLC 4-Point Thermocouple |
A-B 1746-IO12 Module Rockwell SLC 12 Point Combo |
A-B 1746-IO12DC Module Rockwell SLC 12 Point Combo |
A-B 1746-IO4 Module Rockwell SLC 4 Point Combo |
A-B 1746-IO8 Module Rockwell SLC 8 Point Combo |
A-B 1746-ITB16 module Rockwell SLC 16 digital input |
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved