ABB NASM03 Analog Slave Module

Model Type: 6634416D1 Analog Slave Module

Field device management

HART and PROFIBUS devices are fully integrated with

Symphony Plus, yielding benefits far beyond reduced

footprint and cable costs. The S+ Engineering tool suite

supports configuration, commissioning and maintenance of

HART and PROFIBUS devices using device type manager

(DTM) technology. For field devices that have conventional

device description files (GSD), a basic PROFIBUS DTM is

available to allow standardized configuration. HART devices

are integrated, configured and parameterized via standard

HART protocol without the need for additional tools by

using a standard HART DTM. The individual DTMs can be

accessed from Composer Field’s multiple data views, such

as the system or location overview and others. Composer

Field includes automatic net calculation and loading

of process items by using the device-specific channel

configuration generated from the DTM.

The S100 I/O process interface modules for Advant Controller 400 series process controllers come with connection units

simplifying cable termination and keeping noise and destructive spikes away from the central electronics.

S100 I/O is the central process interface for Advant Controller 400 series process controllers. 

Thanks to built-in cablemarshalling facilities and parallel communication with the host controller, 

it is the right choice for centralized I/O systems and high-speed applications.

The range of process I/O modules is complete, consisting of general purpose digital and analog

inputs and outputs and special interfaces for specialtasks. These specials include pulse counting,

frequency measuring, positioning, motor speed control and communication with other controllers.

Maximum 304 seconds (default, configurable).

For IEEE 802.1Q VLAN frames, the switch can be configured in VLAN or transparent mode. In transparent mode

the switch does not change any frames or frame TAGs; in VLAN

mode, the switch can be configured to support a variety of applications, such as

trunking or access ports.

The switch will support quality of service if it uses an IEEE 802.1p-compliant frame format.

The switch can support quality of service if the frame format is IEEE 802.1p compliant. The switch can divide frames

into up to four queues, which can be configured as priority queues or weighted fair queues.

The switch uses a 5 V supply voltage, which can be set as the internal RTU power supply or via a jumper.

It can be set to internal RTU power or external power via jumpers.

The components themselves, the Ethernet ports, as well as the SDSL

connections and RS232 interfaces are hot-swappable.

Use the 560NMS24 unit as a repeater for longer distance transmission.