System Power-Up
If at any time during this procedure the defined or expected result is not achieved, begin system
troubleshooting.
1. Verify that the entire MicroNet Plus control system has been installed.
2. Turn on the power to one power supply and verify that the power supply’s green LED is the only
power supply LED on.
3. Turn off the power to the first power supply and turn on the power to the second power supply (if a
second power supply is present) and verify that the power supply’s green LED is the only power
supply LED on.
4. The RTN_CPUs in the chassis will not start automatically, the CPUs in the TMR chassis must
command them to start. See GAP application program for details.
For redundant operation, the control can use any combination of power supplies.

The power supplies can only be installed into slots PS1 (power supply #1) and PS2 (power supply #2). If
redundant power supplies are not needed, blanking plates must be installed in the slots not being used.
Branch circuit fuses, circuit breakers, and wiring must meet appropriate codes and authorities having
jurisdiction for the specific country (CE, UL, etc.). See Table 4-3 for maximum recommended fuse or
breaker ratings. Do not connect more than one main power supply to any one fuse or circuit breaker. Use
only the wire sizes specified in Table 4-3. which meet local code requirements. Time delay fuses or circuit
breakers must be used to prevent nuisance trips.
In the event that on supply needs to be replaced, the recommended method for changing
Power Modules is with the power off (to the module being removed and the module being inserted).
The system will tolerate this “cold swap” method without failure.
| ABB CPU0002 Industrial Control Module |
| ABB BIO0003 Industrial Control Module |
| ABB R1091 Industrial Control Module |
| ABB AIM0016 Digital Input Module |
| ABB DIS0006 Custom Processing Module |
| ABB BPL0001 Process Control Module |
| ABB REF615C Feeder protection |
| ABB BCU-12 control units |
| ABB DSDP150 Pulse Encoder Input Unit |
| ABB PFSK151 Signal Processing Board |
| ABB PFSK152 Signal Processing Board |
| ABB OKYM175W22 I/O Series Machine |
| ABB PXAH401 Industrial PLC Controller |
| ABB PXAH 401 3BSE017235R1 Industrial PLC Controller |
| ABB NU8976A99 Digital I/O Module |
| ABB PPC380AE02 High-Performance Control Module |
| ABB PPC380AE102 High-Performance Control Module |
| ABB ASE2UDC920AE01 cutting-edge control module |
| ABB PDP800 Profibus DP V0/V1/V2 Master Module |
| ABB FM9925A-E Industrial Automation Control Module |
| ABB CI810B 3BSE020520R1 Fieldbus Communication Interface |
| ABB PFEA112-20 3BSE050091R20 Electronic tension controller |
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved