CompactLogix 5380 Controllers
Overview
Ideal for small to large applications that require low axis motion and I/O point counts
Enable high-speed I/O, motion control, Device Level Ring and Linear topologies
Offer a 1 gigabit (Gb) embedded EtherNet/IP port that enables CIP safety connections, I/O and safety devices
Include dual configurable ports that support Dual-IP address
Provide enhanced diagnostics and troubleshooting with controller status and fault display
Offer controller functions optimized for maximum system performance
Offer enhanced security features that include controller-based change detection, logging,
encrypted firmware and role-based access control to routines and Add-On Instructions
Support up to 31 local Compact 5000™ I/O modules
Offer integrated motion on EtherNet/IP up to 32 axes
Offer a wide range of memory options from 0.6...10 MB
Compact GuardLogix 5380 safety controllers
Achieve up to SIL 2/PLd with 1oo1 architecture or up to SIL 3/PLe with 1oo2 architecture
Offer standard memory options from 0.6…10 MB
Offer safety memory options from 0.3…5 MB
Offer 1 gigabit (Gb) embedded Ethernet port
Support communication options for up to 180 EtherNet/IP nodes
Offer conformal coated options for harsh environments
Provide single controller/software/network for standard and safety control
Ability to mix and match safety and standard I/O
Provide integrated safety functions with drives and motion
Ability to connect with scaled HMI options from PanelView™ 800 graphic terminals
New Look, Same High Performance
CompactLogix™ 5380 standard, safety and process controllers have a refreshed plastics, lens and label appearance.
This visual enhancement enables users to identify critical product information and distinctions clearly, then take appropriate action with improved ease.
There are no changes to existing product specifications. The same high performance users value today, remains unchanged.
Increased Data Protection with New CIP Security Capability Available Now!
Our CompactLogix 5380 portfolio incorporates CIP Security™ support to help keep your systems secure.
This new capability provides secure connectivity and communication with EtherNet/IP™ network protocol,
through validation of device authentication, data integrity and data confidentiality.
It is available with Studio 5000 Logix Designer® version 34 or later.
Our CompactLogix™ and Compact GuardLogix® 5380 controllers provide higher performance,
increased capacity, improved productivity and enhanced security to help meet the growing demands
of smart machines and equipment for manufacturing.
All standard and safety controllers use a modern programming environment, Studio 5000 Logix Designer® application,
to allow users to work collaboratively to design and maintain their systems.
This common environment optimizes efficiency, reduces time to commission and manages integrated
motion over EtherNet/IP™ for high-speed motion applications and up to SIL 3/PLe safety solutions.
These controllers are ideal for applications requiring high-performance communications, I/O and motion control for up to 32 axes.
It can also help you create more competitive operations with:
Common plant-wide control
ControlLogix 5580 controllers provide multi-discipline control for discrete, motion, process and safety applications.
A simplified architecture
Our Logix offerings work together in what we call our Integrated Architecture® offering.
It helps you keep costs down and reduce system complexity.
Enhanced security
The ControlLogix 5580 controller incorporates security mechanisms like centralized authentication and access control to help keep your systems secure.
We have also received ISO 27001 certification to help protect intellectual property – both ours and yours.
And our vulnerability-management process aligns to IEC 29147 and 30111.
Include the communication modules you need for connectivity to other networks.
For this use, a controller is not required. The ControlLogix Gateway integrates
into existing PLC-based systems so that users with existing networks can
send or receive messages to or from other networks.
For a more robust system, use:
• multiple controllers in a single chassis
• multiple controllers joined across networks
• I/O in multiple platforms that is distributed in many locations and connected over multiple I/O links
You may also need the following related products:
A-B | 1756-IB16ISOE Module Rockwell ControlLogix 16 Points |
A-B | 1756-IB32 Module Rockwell ControlLogix 32 Points |
A-B | 1756-IC16 module Rockwell ControlLogix 16-point DC output control |
A-B | 1756-IF16 module Rockwell ControlLogix 16 analog output control |
A-B | 1756-IF16H module Rockwell ControlLogix 16 analog output control |
A-B | 1756-IF4FXOF2F Module Rockwell ControlLogix 6 Point Module |
A-B | 1756-IF6CIS module Rockwell ControlLogix 6 analog output control |
A-B | 1756-IF6I module Rockwell ControlLogix 6 analog output control |
A-B | 1756-IF8 module Rockwell ControlLogix 8 analog output control |
A-B | 1756-IF8H module Rockwell ControlLogix 8 analog output control |
A-B | 1756-IG16 module Rockwell ControlLogix 16-point DC output control |
A-B | 1756-IH16I module Rockwell ControlLogix 16-point DC output control |
A-B | 1756-IH16ISOE module Rockwell ControlLogix 16-point DC output control |
A-B | 1756-IM16I module Rockwell ControlLogix 16-point DC output control |
A-B | 1756-IN16 module Rockwell ControlLogix 16-point DC output control |
A-B | 1756-IR6I Module Rockwell ControlLogix 6 Point Module |
A-B | 1756-IT6I module Rockwell ControlLogix 6-point input control |
A-B | 1756-IT6I2 module Rockwell ControlLogix 6-point input control |
A-B | 1756-IV16 module Rockwell ControlLogix 16-point DC output control |
A-B | 1756-IV32 module Rockwell ControlLogix 32-point DC output control |
A-B | 1756-L60M03SE Module Rockwell LOGIX5560M03SE |
A-B | 1756-L61 Module Rockwell ControlLogix 2 MB Memory Control |
A-B | 1756-L61RMCN1 Module Rockwell ControlNet Redundancy Bundle |
A-B | 1756-L61RMEN1 Module Rockwell Ethernet Redundancy Bundle |
A-B | 1756-L61S Module Rockwell GuardLogix 2 MB Standard Memory Control |
A-B | 1756-L62 Module Rockwell ControlLogix 4 MB Memory Control |
A-B | 1756-L62S Module Rockwell GuardLogix 4 MB Standard Memory Control |
A-B | 1756-L63 Module Rockwell ControlLogix 8 MB Memory Control |
A-B | 1756-L63S Module Rockwell GuardLogix 8 MB Standard Memory Control |
A-B | 1756-L63XT Module Rockwell ControlLogix XT 8 MB Memory Control |
A-B | 1756-L64 Module Rockwell ControlLogix 16 MB Memory Control |
A-B | 1756-L65 Module Rockwell ControlLogix 32 MB Memory Control |
A-B | 1756-L71 Module Rockwell ControlLogix 2 MB Memory Control |
A-B | 1756-L72 Module Rockwell ControlLogix 4 MB Memory Control |
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved