Power Engineering 
K-JIANG
Product
Article
NameDescriptionContent
English 简体中文
  • Beckhoff ELM3002-0235 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0225 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0205 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0030 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0000 | EtherCAT Terminal, 2-channel analog input, voltage
  • Basler Electric Class 200 Equipment SSR Series Voltage Regulators
  • Basler Electric SSR 63-12NF SSR Series Voltage Regulators
  • Basler Electric Model RA-70 Microprocessor-Based Reference Adjuster
  • Beckhoff ELM3002-0235 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0225 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0205 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0030 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0000 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff EL3783-0100 | EtherCAT Terminal, 3-channel analog input, multi-function
  • Beckhoff EL3783 | EtherCAT Terminal, 3-channel analog input, multi-function
  • Beckhoff EL3773 | EtherCAT Terminal, 3-channel analog input, multi-function
  • Beckhoff EL3751-0024 | EtherCAT Terminal, 1-channel analog input, temperature
  • Beckhoff EL3751-0020 | EtherCAT Terminal, 1-channel analog input, multi-function
  • Beckhoff EL3751 | EtherCAT Terminal, 1-channel analog input, multi-function
  • Beckhoff EL3742 | EtherCAT Terminal, 2-channel analog input, current
  • Beckhoff EL3702-0015 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff EL3702 | EtherCAT Terminal, 2-channel analog input, voltage
  • CTI 2500S-27-1550 Slice I/O, RS232/485, 2DIO / 4UAI / 2AI (MATURE)
  • CTI 2500S-26-1550 Slice I/O, RS232/485, 8DIO / 2UAI
  • CTI 2500S-23-1550 Slice I/O, RS232/485, 4DI / 4DO / 2UAI / 2AO
  • CTI 2500-RIO-B RS485 Remote Base Controller
  • CTI 2500-RIO-A RS485 Remote Base Controller (MATURE - replaced by 2500-RIO-B)
  • CTI 2532 16-Point Form-A Relay Output Module
  • Aerotech Automation1 XL4s High-Speed, Single-Phase Linear Servo Drive
  • Aerotech Automation1 XL2e Enhanced, Compact Linear Servo Drive
  • Aerotech Automation1 iXL2e Enhanced, Compact Linear Servo Drive with Motion Controller
  • Aerotech Automation1 XL5e Enhanced, Linear Servo Drive
  • Aerotech Automation1 GI4 Laser Scan Head Controller
  • Aerotech Automation1 SI4 Stepper Interface
  • Basler Electric BE3-GPR Generator Protective Relay
  • Basler Electric BE3-47N and BE3-47N/27 Phase Balance Relay
  • Basler Electric BE3-27T, BE3-59T, and BE3-27T/59T Ac Voltage Relay
  • Basler Electric BE1-CDS240 Current Differential System
  • Basler Electric BE3-49R - 3 Inputs Temperature Relay
  • Basler Electric SCP 250 Var/Power Factor Controller
  • Beckhoff EL3681-0030 | EtherCAT Terminal, 1-channel analog input, multimeter
  • Beckhoff EL3681 | EtherCAT Terminal, 1-channel analog input, multimeter
  • Beckhoff EL3475-0200 | EtherCAT Terminal, 12-channel analog input, 4-port, multi-function
  • Beckhoff EL3475 | EtherCAT Terminal, 12-channel analog input, 4-port, multi-function
  • Beckhoff EL3453-0120 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453-0100 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453-0090 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453-0030 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453-0020 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3446-0011 | EtherCAT Terminal, 6-channel analog input, current
  • Beckhoff EL3443-0020 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3443-0013 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3443-0011 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3443-0010 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3443 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff ED3362-0100 | EtherCAT Terminal, 2-channel analog input
  • Beckhoff ED3362 | EtherCAT Terminal, 2-channel analog input, measuring bridge
  • Beckhoff ED3361-0100 | EtherCAT Terminal, 1-channel analog input
  • Beckhoff ED3361 | EtherCAT Terminal, 1-channel analog input, measuring bridge
  • Beckhoff EL3356-0090 | EtherCAT Terminal, 1-channel analog input, measuring bridge
  • Eaton generator relay EGR5000
  • Eaton Protection Features EDR-5000
  • Eaton EDR-5000 Distribution Protection Relay
  • Eaton EBR-3000/EBR-Z Eaton high impedance bus differential relay
  • Eaton Arc Flash Relay
  • Eaton BushingGard
  • Eaton Bussmann series Quik-Spec Coordination Panel (QSCP)
  • Eaton BR two-pole ground fault circuit breaker
  • Bently Nevada 3500/92 Communication Gateway
  • Eaton MTL PAC8000 8507-BI-DP BIM and 8701-CA-BI Carrier PROFIBUS DP Bus Interface Module and Carrier
  • ABB Vishay EsTa Power capacitors solutions
  • Basler Electric AEC63-7 Voltage Regulator
  • Basler Electric BE1-BPR Breaker Protection Relay
  • Beckhoff EL3314-0092 | EtherCAT Terminal, 4-channel analog input, temperature
  • Beckhoff EL3314-0090 | EtherCAT Terminal, 4-channel analog input, temperature
  • Beckhoff ED3274 | EtherCAT Terminal, 4-channel analog input, temperature, RTD, TC, push-in
  • Beckhoff EL3214-0090 | EtherCAT Terminal, 4-channel analog input, temperature
  • Beckhoff EL3202-0020 | EtherCAT Terminal, 2-channel analog input, temperature
  • Beckhoff EL3202-0030 | EtherCAT Terminal, 2-channel analog input, temperature
  • Beckhoff EL3201-0030 | EtherCAT Terminal, 1-channel analog input, temperature
  • Beckhoff EL3184 | EtherCAT Terminal, 4-channel analog input, current, 4…20 mA
  • Beckhoff EL3182 | EtherCAT Terminal, 2-channel analog input, current, 0/4…20 mA
  • Beckhoff EL3174-0090 | EtherCAT Terminal, 4-channel analog input, multi-function
  • Basler Electric SSE Shunt Static Exciter-Regulator
  • Basler Electric BE1-46N Negative Sequence Overcurrent Relay
  • INDUSTRIAL INDEXING SYSTEMS IIS MSC-850/32 SYSTEM UNIT
  • INDUSTRIAL INDEXING SYSTEMS IIS MSC-250 2½-AXIS SERVO CONTROLLER
  • SAACKE FUEL TRAINS For industrial applications
  • SAACKE se@vis 4 MORE THAN JUST A BURNER CONTROL SYSTEM
  • SAACKE CCS-LT COMPACT ALL-STEEL HOT GAS GENERATOR
  • SAACKE CCS-HT COMPACT HOT GAS GENERATOR
  • SAACKE CCS-HT VERSATILE HOT GAS GENERATOR FOR DEMANDING INDUSTRIAL PROCESSES
  • SAACKE TEMINOX THE ULTRA-LOW-NOX BURNER FOR YOUR PROCESS HEAT
  • SAACKE SWIRL BURNER SSB
  • SAACKE ROTONOX THE NEW ROTARY ATOMIZER FOR MAXIMUM EFFICIENCY
  • Basler Electric BE1-67N Ground Directional Overcurrent Relay
  • Basler Electric BE1-87G Variable Percentage Differential Relay
  • Basler Electric IFM-150 Interface Firing Module
  • Basler Electric BE1-87T Transformer Differential Relay
  • Aerotech Automation1 XI4 Servo Controller
  • Aerotech Automation1 iXI4 Motion & Servo Controller
  • Aerotech Automation1 XC6e Enhanced, High-Power PWM Servo Drive
  • Aerotech PWM Servo Motor Drives Automation1 XC2
  • Aerotech Automation1 XC4 PWM Servo Drive
Home ⊙ Product ⊙ GE IS200EMIOH1A Exciter Main I/O Board
Current Location:

E-mail

Password
Register Forgot password?
GE IS200EMIOH1A Exciter Main I/O Board
❤ Add to collection

GE IS200EMIOH1A Exciter Main I/O Board

+86-18144100983
kongjiangauto@163.com
wind, petroleum, chemical, natural gas, Marine, mining, aviation, electronics, steel, nuclear power, electric power, coking, air separation and so on
PLC, DCS, servo, analog, Ethernet, digital, redundant module, tension system, excitation, generator management, human-machine interface, detection card, sensor, AC drive, etc
IS200EMIOH1A
U.S.＄10055.00
U.S.＄4548.00
Weight：0.000KG
Quantity：
(Inventory: 1)
Buy now
Add to cart
Product parameters
  • Tell:+86-18144100983
  • email:kongjiangauto@163.com
  • Application:wind/ petroleum/ chemical/ natural gas/ Marine/ mining/ aviation/ electronics/ steel/ nuclear power/ electric power/ coking/ air separation and so on
  • Series:PLC/ DCS/ servo/ analog/ Ethernet/ digital/ redundant module/ tension system/ excitation/ generator management/ human-machine interface/ detection card/ sensor/ AC drive/ etc
Feature
IS200EMIOH1A

Part Number IS200EMIOH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series EX 2100e Function Module Availability In StockIS200EMIOH1A is an Exciter Main I/O Board manufactured by General Electric under EX2100 Series. It is a single-slot, double-height VME style board that is installed in the control rack. The EPCT, ECTB, EACF, and EXTB terminal boards' I/O is handled by EMIO. PT and CT signals are included in the I/O. Contact inputs, output relay drivers, and pilot trip relay drives are all available. It also sends logic level gate pulse signals to the ESEL board, which sends them to EGPA in the power conversion cabinet via the backplane.

EMIO manages inputs and outputs from a variety of I/O boards connected to the control rack. Application Data The Power LED is connected to the 5 V dc power supply, and the Status LED is connected to the FPGA's IMOK output. On the board, there are no jumpers, fuses, or cable connectors. All I/O board cabling is connected to the control backplane (EBKP). Connector P1 communicates with the other control boards via the backplane, while P2 interfaces with the I/O signals via cable connectors located on the lower part of EBKP. IS200EMIOH1A Board Replacement (Offline) Ensure that the exciter has been deactivated. Open the control cabinet door and check any electrical circuits for power before touching them.

Remove the EMIO board from the control rack with care as follows: Loosen the screws near the ejector tabs at the top and bottom of the faceplate. (The screws in the faceplate are captive and should not be removed.) Remove the module by lifting the ejector tabs. Gently pull it from the rack with both hands.

Insert the replacement EMIO board into the appropriate rack slot. Begin seating the board by firmly pressing the top and bottom of the faceplate with your thumbs at the same time. Tighten the screws at the top and bottom of the faceplate to finish seating the board in the slot. To ensure that the module is seated squarely, tighten the screws evenly.

  • Basler Electric Class 200 Equipment SSR Series Voltage Regulators
  • Basler Electric SSR 63-12NF SSR Series Voltage Regulators
  • Basler Electric Model RA-70 Microprocessor-Based Reference Adjuster
  • Beckhoff ELM3002-0235 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0225 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0205 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0030 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff ELM3002-0000 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff EL3783-0100 | EtherCAT Terminal, 3-channel analog input, multi-function
  • Beckhoff EL3783 | EtherCAT Terminal, 3-channel analog input, multi-function
  • Beckhoff EL3773 | EtherCAT Terminal, 3-channel analog input, multi-function
  • Beckhoff EL3751-0024 | EtherCAT Terminal, 1-channel analog input, temperature
  • Beckhoff EL3751-0020 | EtherCAT Terminal, 1-channel analog input, multi-function
  • Beckhoff EL3751 | EtherCAT Terminal, 1-channel analog input, multi-function
  • Beckhoff EL3742 | EtherCAT Terminal, 2-channel analog input, current
  • Beckhoff EL3702-0015 | EtherCAT Terminal, 2-channel analog input, voltage
  • Beckhoff EL3702 | EtherCAT Terminal, 2-channel analog input, voltage
  • CTI 2500S-27-1550 Slice I/O, RS232/485, 2DIO / 4UAI / 2AI (MATURE)
  • CTI 2500S-26-1550 Slice I/O, RS232/485, 8DIO / 2UAI
  • CTI 2500S-23-1550 Slice I/O, RS232/485, 4DI / 4DO / 2UAI / 2AO
  • CTI 2500-RIO-B RS485 Remote Base Controller
  • CTI 2500-RIO-A RS485 Remote Base Controller (MATURE - replaced by 2500-RIO-B)
  • CTI 2532 16-Point Form-A Relay Output Module
  • Aerotech Automation1 XL4s High-Speed, Single-Phase Linear Servo Drive
  • Aerotech Automation1 XL2e Enhanced, Compact Linear Servo Drive
  • Aerotech Automation1 iXL2e Enhanced, Compact Linear Servo Drive with Motion Controller
  • Aerotech Automation1 XL5e Enhanced, Linear Servo Drive
  • Aerotech Automation1 GI4 Laser Scan Head Controller
  • Aerotech Automation1 SI4 Stepper Interface
  • Basler Electric BE3-GPR Generator Protective Relay
  • Basler Electric BE3-47N and BE3-47N/27 Phase Balance Relay
  • Basler Electric BE3-27T, BE3-59T, and BE3-27T/59T Ac Voltage Relay
  • Basler Electric BE1-CDS240 Current Differential System
  • Basler Electric BE3-49R - 3 Inputs Temperature Relay
  • Basler Electric SCP 250 Var/Power Factor Controller
  • Beckhoff EL3681-0030 | EtherCAT Terminal, 1-channel analog input, multimeter
  • Beckhoff EL3681 | EtherCAT Terminal, 1-channel analog input, multimeter
  • Beckhoff EL3475-0200 | EtherCAT Terminal, 12-channel analog input, 4-port, multi-function
  • Beckhoff EL3475 | EtherCAT Terminal, 12-channel analog input, 4-port, multi-function
  • Beckhoff EL3453-0120 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453-0100 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453-0090 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453-0030 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453-0020 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3453 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3446-0011 | EtherCAT Terminal, 6-channel analog input, current
  • Beckhoff EL3443-0020 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3443-0013 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3443-0011 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3443-0010 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff EL3443 | EtherCAT Terminal, 3-channel analog input, power measurement
  • Beckhoff ED3362-0100 | EtherCAT Terminal, 2-channel analog input
  • Beckhoff ED3362 | EtherCAT Terminal, 2-channel analog input, measuring bridge
  • Beckhoff ED3361-0100 | EtherCAT Terminal, 1-channel analog input
  • Beckhoff ED3361 | EtherCAT Terminal, 1-channel analog input, measuring bridge
  • Beckhoff EL3356-0090 | EtherCAT Terminal, 1-channel analog input, measuring bridge
  • Eaton generator relay EGR5000
  • Eaton Protection Features EDR-5000
  • Eaton EDR-5000 Distribution Protection Relay
  • Eaton EBR-3000/EBR-Z Eaton high impedance bus differential relay
  • Eaton Arc Flash Relay
  • Eaton BushingGard
  • Eaton Bussmann series Quik-Spec Coordination Panel (QSCP)
  • Eaton BR two-pole ground fault circuit breaker
  • Bently Nevada 3500/92 Communication Gateway
  • Eaton MTL PAC8000 8507-BI-DP BIM and 8701-CA-BI Carrier PROFIBUS DP Bus Interface Module and Carrier
  • ABB Vishay EsTa Power capacitors solutions
  • Basler Electric AEC63-7 Voltage Regulator
  • Basler Electric BE1-BPR Breaker Protection Relay
  • Beckhoff EL3314-0092 | EtherCAT Terminal, 4-channel analog input, temperature
  • Beckhoff EL3314-0090 | EtherCAT Terminal, 4-channel analog input, temperature
  • Beckhoff ED3274 | EtherCAT Terminal, 4-channel analog input, temperature, RTD, TC, push-in
  • Beckhoff EL3214-0090 | EtherCAT Terminal, 4-channel analog input, temperature
  • Beckhoff EL3202-0020 | EtherCAT Terminal, 2-channel analog input, temperature
  • Beckhoff EL3202-0030 | EtherCAT Terminal, 2-channel analog input, temperature
  • Beckhoff EL3201-0030 | EtherCAT Terminal, 1-channel analog input, temperature
  • Beckhoff EL3184 | EtherCAT Terminal, 4-channel analog input, current, 4…20 mA
  • Beckhoff EL3182 | EtherCAT Terminal, 2-channel analog input, current, 0/4…20 mA
  • Beckhoff EL3174-0090 | EtherCAT Terminal, 4-channel analog input, multi-function
  • Basler Electric SSE Shunt Static Exciter-Regulator
  • Basler Electric BE1-46N Negative Sequence Overcurrent Relay
  • INDUSTRIAL INDEXING SYSTEMS IIS MSC-850/32 SYSTEM UNIT
  • INDUSTRIAL INDEXING SYSTEMS IIS MSC-250 2½-AXIS SERVO CONTROLLER
  • SAACKE FUEL TRAINS For industrial applications
  • SAACKE se@vis 4 MORE THAN JUST A BURNER CONTROL SYSTEM
  • SAACKE CCS-LT COMPACT ALL-STEEL HOT GAS GENERATOR
  • SAACKE CCS-HT COMPACT HOT GAS GENERATOR
  • SAACKE CCS-HT VERSATILE HOT GAS GENERATOR FOR DEMANDING INDUSTRIAL PROCESSES
  • SAACKE TEMINOX THE ULTRA-LOW-NOX BURNER FOR YOUR PROCESS HEAT
  • SAACKE SWIRL BURNER SSB
  • SAACKE ROTONOX THE NEW ROTARY ATOMIZER FOR MAXIMUM EFFICIENCY
  • Basler Electric BE1-67N Ground Directional Overcurrent Relay
  • Basler Electric BE1-87G Variable Percentage Differential Relay
  • Basler Electric IFM-150 Interface Firing Module
  • Basler Electric BE1-87T Transformer Differential Relay
  • Aerotech Automation1 XI4 Servo Controller
  • Aerotech Automation1 iXI4 Motion & Servo Controller
  • Aerotech Automation1 XC6e Enhanced, High-Power PWM Servo Drive
  • Aerotech PWM Servo Motor Drives Automation1 XC2
  • Aerotech Automation1 XC4 PWM Servo Drive
  • Aerotech Enhanced PWM Servo Drive Automation1 XC4e
  • Aerotech Automation1 XR3 Multi-Axis Servo Drive Rack
  • Aerotech Automation1 iXR3 Multi-Axis Servo Drive Rack with Motion Controller
  • Aerotech Automation1 iXC2 Compact PWM Servo Drive with Motion Controller
  • Aerotech Automation1 iXC4 Drive-Based Motion Controller
  • Aerotech Automation1 iXC4e Enhanced, PWM Servo Drive with Motion Controller
  • Aerotech Automation1 HyperWire Motion Control Communication Bus
  • Aerotech Dynamic Controls Toolbox Advanced Controller-Level Algorithms
  • Aerotech EPICS & TANGO Drivers for Distributed Control Systems
  • ICS TRIPLEX T8451 Trusted TMR 24 Vdc Digital Output Module – 40 Channel
  • Beckhoff EL3124-0090 | EtherCAT Terminal, 4-channel analog input, current, 4…20 mA
  • Beckhoff EL4374 | EtherCAT Terminal, 2-channel analog input + 2-channel analog output
  • Beckhoff ED3174 | EtherCAT Terminal, 4-channel analog input, multi-function
  • Basler Electric SR4A, Retrofit Voltage Regulator
  • Basler Electric SR9A, Retrofit Voltage Regulator
  • Basler Electric SR8A, Retrofit Voltage Regulator
  • Basler Electric SR6A, Retrofit Voltage Regulator
  • Basler Electric SSR63-12, Retrofit Voltage Regulator
  • Basler Electric SR Retrofit, SSR Retrofit, Voltage Regulator
  • Basler Electric DECS-250N Digital Excitation Control System
  • Basler Electric DXCB-2 De-Excitation/Crowbar Module
  • Basler Electric FGD-2 Field Ground Detector
  • Basler Electric Software BESTdata
  • Basler Electric Software BESTCOMSPlus®
  • Basler Electric BE1-11d DC Power Protection System
  • Basler Electric IT-D, Isolation Transducer
  • Basler Electric IDP-2020 Interactive Display Panel
  • Basler Electric VRM-2020, Voltage Regulation Module
How to install and debug this product? Matters needing attention
Where can I download the manual and programming software?
Is it in stock or need to be ordered?
Can you provide technical service?
Where can I order this series?
Do you have product selection list and pre-sale service?