Be Certain with Belden — the Original Developer of High Quality
Performance VFD Cable
Belden VFD Cables Deliver Top Performance in Any Environment
All Cables
• Thicker, industrial-grade XLPE insulations provide low capacitance for
extended motor life, reduced likelihood of corona discharge, reduced
magnitude of standing waves, increased efficiency of power transfer
• Robust ground and shielding system to minimize radiated and conducted
noise that can disrupt plant control and instrumentation systems
• Reliably carry power from AC drive systems to AC motors
• Effectively handle the overall high power levels of pulse-width modulated
(PWM) signals
• Reliably handle high voltage spikes
– eliminating potential damage to the cable, motors, bearings, drives and
related equipment
- potentially extending their life
• Industrial-grade PVC jackets provide sunlight- and oil-resistance;
Haloarrest jackets are halogen-free and provide sunlight-resistance in
LSZH versions

• Impervious to adverse or harsh environments
• ER rating allows for the elimination of conduit for easier and less
expensive installations
• Effectively eliminate downtime due to cable failure
300% Ground Foil/Braid Designs
• Contain as more copper in the ground system than so-called Foil/Braid VFD
cables
• High-strand conductors ease installation
• Tinned copper conductors to prevent against corrosion
• Low capacitance and low impedance of the cables closely matches the drive
and electrical values
• Round configuration for reliable sealing 100% Ground Symmetrical Designs
• Smaller OD than the Classic Designs with Foil/Braid
• Full sized ground in 3 segments
Continuous Flex & Extra Flexible Designs
• Increased range of flexibility, with up to 10M flex cycles for on-machine
applications (8AWG and smaller)
• Extreme high-strand conductors ease installation, enable best-in-class
vibration resistance with over 2.000 strands on large gauge sizes
• Tinned copper circuit conductors and grounds, TPE jackets for added flexibility
300% Ground with Signal Pair
• Overall jackets provide more protection for the integrated signal pair
• Easier, lower cost installation than pulling the signal pair separately
• Pair outside primary shielding for effective isolation
Belden Basics
• Cost-effective dual foil VFD cable solution
• Available in 600/1000V and 2Kv versions
Applicable for Use With:
• Rockwell Automation AC drives
• ABB
• Baldor
• Control Techniques
• Cutler-Hammer
• General Electric
• Hitachi
• Magnetek
• Mitsubishi Electric Automation
• Schneider Electric
• Siemens
• Square D
• Toshiba
Belden VFD Cables versus Tray Cables or Single Conductor Products
• Superior radiated and conducted noise protection with robust shield and
ground design
• XLPE insulation provides lower capacitance resulting in reduced voltage
spikes and corona discharge
• Extended motor life
• Longer cable runs
*Tinned Copper (TC) †Bare Copper (BC)

wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2026 Cld , All Rights Reserved K-JIANG All rights reserved