Product scope
Adds copper Ethemet and serial communication paths tO a Tricon
Separates plant-network services from the safety execution channels.
Provides onboard status and communication diagnostics for maintenance.
The product is the original 4351 TCM generation and must be identified
independently from the A and B revisions.

Official source basis
Schneider Electric / Triconex Tricon Product Guide and Planning and
Installation Guide, communication-module compatibility rules.
Technical facts are limited to the identified manufacturer documentation
and the exact ordering configuration shown above.
4351 technical profile
Triconex 4351 a copper-media Tricon Communication Module from the
earlier TCM hardware family. lt combines Ethernet services h serial
controller connecuvity for plant hosts and engineering access.
The module transfers selected controller data without disturbng the
triplicated safety execution path. TCM firmware and system software
estabbsh the supported photocols, address behavior and diagnostic
functions Do not mix 4351 / 4352 hardware with later 4351A 4351
4352A or 4352B modules in one Tricon system. Confirm release
compatibility. copper network interfaces. COM-slot placement and
downloaded configuration before exchange.
Selection notice
4351 cannot coexist with later 4351A/B or 4352A/B TCM generations
in the same system: verify controller release before installation.

wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2026 Cld , All Rights Reserved K-JIANG All rights reserved