Basler DECS‑200‑1C Digital Excitation Control System
Product Overview
DECS‑200‑1C, manufactured by Basler Electric, is a full‑featured microprocessor‑based digital excitation control system (digital AVR) for synchronous generators. It supports 32 Vdc, 63 Vdc, 125 Vdc field output with continuous 15 Adc rating and 30 Adc 10‑second forcing capability. The built‑in PWM power stage delivers stable performance under non‑linear generator loads. Document reference: Instruction Manual Publication 9360100990.
DECS‑200‑1C supports multiple operation modes, comprehensive limiters, generator protection, sequence‑of‑events recording, oscillography and Modbus communication. It fits stand‑alone generator sets as well as grid‑parallel / multi‑generator paralleling applications. Certifications include UL, CSA, CE, DNV marine certification, GOST‑R and compliance with IEEE C37.90.1 surge withstand standard.

Physical & Environmental
- Dimensions: 205 mm width × 171 mm depth × 304 mm height
- Weight: 6.35 kg (14 lbs)
- Operating temperature: ‑40 °C ~ +60 °C, storage ‑40 °C ~ +85 °C
- Salt‑fog compliance MIL‑STD‑810E, shock 15 G, wide‑range vibration resistance
Main Operating Modes
1. AVR Voltage Regulation Mode
Primary automatic voltage control mode with ±0.25% regulation accuracy. 20 pre‑configured PID stability sets plus fully custom PID tuning. Includes V/Hz under‑frequency limiter and soft‑start voltage build‑up.
2. FCR Field‑Current Regulation Mode (Manual Mode)
Directly regulates exciter field current. Serves as vital backup when generator voltage sensing signal is lost.
3. VAR Control Mode
For grid‑parallel generators, regulates generator reactive power output to a set var target.
4. PF Power‑Factor Control Mode
Maintains fixed power‑factor while real kW load varies for grid‑tied generator units.
> Bumpless Transfer: Inactive control modes track active mode values internally for smooth mode switch. Optional external auto‑tracking enables bumpless switch between primary‑backup DECS‑200 units.
Limiters & Generator Protection
Built‑in Limit Functions
- OEL Over‑Excitation Limiter: Two algorithms — Summing‑Point or Takeover (I²t inverse time). Separate settings for on‑line(grid‑connected) and off‑line(breaker‑open). Multi‑level current thresholds with configurable time delays.
- UEL Under‑Excitation Limiter: Prevents generator pole‑slipping; select internal characteristic or 5‑point user‑defined UEL curve.
- SCL Stator‑Current Limiter: Protect generator stator winding against thermal overload, high/low current stages with time‑delay.
- Minimum Excitation Limiter.
8‑Set Generator Protection Features
- Generator Over‑voltage / Under‑voltage
- Field Over‑voltage / Field Over‑current (ANSI C50.13 inverse‑time)
- Loss‑of‑Field protection
- Loss‑of‑Sensing protection
- EDM Exciter Diode Monitor: Detect open / shorted rotating diodes for brushless exciters
- Watchdog fault relay output
Diagnostic & Recording Features
1. SER Sequence‑of‑Events Recording
Stores up to 127 time‑stamped events (IO change, alarms, mode transitions). Data retrievable via BESTCOMS PC software.
2. Oscillography Transient Recorder
Max 8 records stored internally. Each log supports up to 6 selectable generator variables. Supports COMTRADE industry‑standard file format. Trigger sources include level threshold, logic condition or system alarms. Analyze waveform files with Basler BESTWAVE‑32 viewer software.
Interfaces & Communication
Serial Ports
- COM0 (Front‑panel RS‑232. D‑Sub9): Local connection to Windows BESTCOMS configuration software, ASCII protocol.
- COM1 (Side RS‑232): Dedicated port for unit‑to‑unit external auto‑tracking between primary‑backup DECS‑200 controllers.
- COM2 (Side RS‑485): Modbus RTU protocol, max 4000 ft cabling distance, connect to PLC / SCADA monitoring system.
Inputs
- 11‑point dry‑contact binary inputs (24 Vdc internal supply): Start, Stop, Raise / Lower set‑point, mode selection, alarm reset, pre‑position etc.
- Analog remote set‑point input: ±10 Vdc or 4‑20 mA, compatible with external Power System Stabilizer(PSS).
- Generator voltage sensing: single‑phase / three‑phase multi‑range 100‑600 Vac.
wechat/whatsapp:
+86-181-44100-983
Email: kongjiangauto@163.com
Copyright © 2009 - 2026 Cld , All Rights Reserved K-JIANG All rights reserved