Emerson IC695EDS001 PACSystems RX3i DNP3 Ethernet Outstation

Ovation Simulation

Emerson offers Ovation Simulation solutions using virtual technology that faithfully replicates the 

Ovation DCS within a simulator configuration by using a few desktop workstations. 

This approach reduces hardware costs and footprint, allows easy portability for use throughout the facility, 

and greatly simplifies ongoing simulator maintenance and upgrades to track ongoing control system modifications. 

Ovation simulation is a valuable and flexible tool to improve plant operations. 

Typical applications include DCS validation prior to its installation, operator training programs, engineering upgrades,and control changes to improve plant performance.

Specifications

• Number of segments (ports)

• 2

• Number of field devices

• 16 per port (dependent on device power consumption)

• Number of Ff funtion blocks

• 96 per card (64 fieldbus and 32 standard DeltaV)

• Voltage provided per segment

• 28-30 VDC (short circuit protected)

• Current provided per segment

• 400 mA (short circuit protected)

• Isolation

• Each port is isolated from the system and from each other and factory tested to 1500 VDC.

• Nominal signal range (span)

• Fieldbus Foundation IEC 61158-2

• LocalBus current per card (12 VDC nominal)

• 200 mA typical, 300 mA maximum

• Heat Dissipation

• 7.2 W

• Operating Temperature

• -40 to 70 °C (-40 to 158 °F)

• Storage Temperature

• -40 to 85 °C (-40 to 185 °F)

• Reltive Humidity

• 5 to 95% , non-condensing

• Shock

• 10 g½-sine wave for 11 ms

• Vibration

• 1 mm peak-to-peak from 5 to 13.2 Hz; 0.7 g from 13.2 to 150 Hz

Maximize smart device capabilities. Increase your quality and throughput by taking advantage of the added diagnostics

of FOUNDATION Fieldbus I/O devices. Field device status is updated continuously using FOUNDATION Fieldbus I/O.

For multi-variable devices, all process variables are available on the single fieldbus at the cost of a single Device Signal Tag.

Redundant H1 cards provide increased availability.

The DeltaV system offers redundant H1 interfaces. The two H1

interfaces are connected with a redundant terminal block to

provide back-up link active schedule (LAS) capability that also

maintains communication with the host system. 

Transfer to the standby card is automatic and requires no special configuration.

Ongoing diagnostics ensure the standby H1 card is available on demand. 

This process requires no user interaction.