Honeywell 900RTC-L110 Low Voltage RTP Cable (1.0M 3.28ft.)

I/O Modules

The following I/O modules are available to create a custom control solution.

 16 Channel Universal IO Module Galavanically isolated Input/Output to chassis (p.27)

 8-point universal analog input modules: Galvanic isolation point to chassis inputs may be mixed on a module and may include multiple thermocouple types,

RTDs, ohms, voltage or mill voltage types – all easily assigned using the Process Control Designer configuration tool. 

High point-to-point galvanic isolation simplifies installation and saves the expense of external isolation hardware (p.6).

 16-point high level analog input module: each point is configurable for V or mA. Galvanically isolated point to

chassis. Galvanically isolated point to point (p.10). 250-ohm shunt resistors can be added per channel.

 4-point galvanically isolated analog output module.

Galvanically isolated point to chassis supports from 0 to 20mA each (p.12).

 8-point analog output, galvanically isolated in 2 groups of 4 points. Galvanically isolated point to chassis.

Supports from 0 to 20mA each (p.13).

 16-point analog output, galvanically isolated in 4 groups of 4 points. Galvanically isolated point to chassis.

Supports from 0 to 20mA each (p.14).

 16-point digital input modules: Contact closure type, DC Voltage, AC Voltage and AC/DC voltage types (p.15).

Galvanically isolated in groups of 8 channel to chassis

 32-point digital input module: DC voltage. Galvanically isolated point to chassis. Galvanically isolated in 2

groups of 16 points (p.1915).

 8-point AC or 16-point DC digital output modules (sinking type). Galvanically isolated point to chassis.

Galvanically isolated in 2 groups of 8 points (p.18).

 32-point digital output: DC voltage (sourcing type).

Galvanically isolated point to chassis. Galvanically isolated in 2 groups of 16 points (p.23).

 8-point relay output module: four form C type and four form A type relays. 

Galvanically isolated point to chassis. Galvanically isolated relay to relay (p.20).

 4 channel Pulse/Frequency/Quadrature I/O module.

Galvanically isolated point to chassis (p.24).

Capabilities

• IEC 61131-3 Control Programming (Ladder, ST, IL, SFC, FBD)

• Low power consumption

• -40C to 75C Extended Temperature Operation

• ISA100 Wireless I/O

• HART I/O for Diagnostics and Asset Management

• DNP3 with History Recovery to SCADA

• Flow Computer Option

• ISASecure Level 2 Certification for redundant and non-redundant controllers

ControlEdge™ is a next generation family of controllers providing secure connectivity 

through all levels of process and business functions, optimized operations, 

and maintenance efficiencies to meet your diverse automation needs. 

These controllers additionally support inherent integration with Experion® systems when needed to deliver a fully cohesive automation solution. 

The ControlEdge family of controllers turns data into actionable insight, from edge to enterprise, to help customers improve their bottom line.

Insert and Removal of I/O under Power

For ease of maintenance, the ControlEdge HC900 controller

supports removing and inserting I/O modules from the

module rack without removing power from the controller.

Each module is sensed for validity by the controller

and auto-configured on insertion.

Other Modules

In addition to I/O, the following modules are available.

 Scanner 1 module, single port (p.31)

 Scanner 2 Module, dual port (p.32)

 Universal AC Power Supply, 60W (p.4)

 Power Supply 24VDC, 60W (p.4)

 Redundant Switch Module (p.33)

 Power Status Module (p.33)

Failsafe

All ControlEdge 900 Platform I/O modules support a user

specified failsafe value (analog) or state (digital) that the

module outputs or inputs will assume if communication

between the controller and the module is interrupted. Output

modules are also disabled if the controller fails to start.

Module diagnostics are not initiated if the control strategy

does not call for the inputs or outputs on the modules to

execute.

Failsafe is restricted to de-energize in safety applications.

Other advantageous products on sale are listed below:

EMERSON SE4017P1 S-series H1 I/O Card with Integrated power and Terminal Block

EMERSON SE4037P1 Redundant S-series H1 I/O Card with Integrated power and Terminal Block

EMERSON S-series Virtual I/O Module 2

EMERSON S-series Virtual I/O Module 2 SE4026

EMERSON SE4027 Redundant S-series Virtual I/O Module 2

EMERSON S-series Profibus DP Interface Card

EMERSON SE4022 S-series Profibus DP Interface Card

EMERSON SE4038 S-series Redundant Profibus DP I/O Interface

EMERSON Single Carrier Extender Cable 0.8m (31in) KJ4003X1-BH3

EMERSON Single Carrier Extender Cable 1.1m (43in) KJ4003X1-BH1

EMERSON Single Carrier Extender Cable 1.5m (58in) KJ4003X1-BH4

EMERSON Single Carrier Extender Cable 1.9m (77in) KJ4003X1-BH5

EMERSON Power Terminal Plug for 2-Wide and 8-Wide Carriers KJ4005X1-BF1

EMERSON SE4006P2 S-series Serial Interface Card, 2-ports

EMERSON SE4036P2 Redundant S-series Serial Interface Card, 2-ports

EMERSON S-series Sequence of Events Card

EMERSON SOE interface with 32-screw termination block SE4001S5T2B4

EMERSON SOE interface with Mass term block Connector SE4001S5T2B5

EMERSON S-series Horizontal Carriers

EMERSON Carrier Blank Cap (for 8-Wide I/O Interface Carrier only) SE6101

EMERSON Carrier Blank Cap (for 2-Wide Power and Controller Carrier only) SE6102

EMERSON Left Extender 1-Wide KJ4005X1-BB1

EMERSON Right Extender 1-Wide KJ4005X1-BC1

EMERSON Single Carrier Extender Cable 0.4m (17in) KJ4003X1-BH2