GE VMIVME-3123 Specifications

Digitized samples are accumulated in a data buffer until retrieved by the system. 

Buffer size is software controlled from one sample to 4 million samples.
Accuracy is optimized with the use of correction values for gain and offset that are applied in real-time,

and determined during a host-controlled calibration mode. Calibration can be performed at any time without removing the board from the system. 

Calibration uses internal precision voltages (a built-in-test feature) applied to all input channels to determine the correction values. 

A test mode as well as the host have access to the voltages for BIT purposes.

• 32 analog output channels

— 12-bit D/A converter

— One S&H for output

— Output short circuit and transient protected

— Unipolar (0 to 10 V, 0 to +5 V) or bipolar (±2.5, ±5, ±10 V)

— Program-selectable scan rates provide improved response for complex

output functions

— 10 mA outputs

— Program-controlled online and offline operating modes

• Built-in-Test on-board

— Tests 100 percent of active components

— Effective in both online and offline modes

— On-board self-test multiplexer and A/D converter

• Semiconductor output switches do not compromise accuracy

• 0.1 Ω output impedance

• On-board ±15 V DC-to-DC conversion

• Front panel activity LED

ANALOG OUTPUTS

Number of Output Channels:

Thirty-Two: One S&H per channel

Full-Scale Analog Output

(Jumper-Selectable):

Unipolar: 0 to +10 V, 0 to +5 V

Bipolar: ±2.5 V, ±5.0 V, ±10.0 V

Analog Output Code: The 12-bit digital-to-analog

converter (DAC) accepts digital codes in straight

binary, offset binary, or two’s complement

Output Load Current: ±10 mA, over the entire

output voltage range of ±10 V

Resolution: 12 bits

Output Impedance: <0.1 Ω, online

>10 MΩ, offline

Total Error: ±0.05 percent of full-scale range

Maximum Settling Time to 1 LSB: 3.4 ms

FUNCTIONAL CHARACTERISTICS

VMEbus Compliance: The analog output board is a standard double height printed circuit board which is compatible with the VMEbus specification (Rev. C.1).

VMEbus A16:D16

Board Address: The physical address for the board

may be selected by on-board jumpers. VMEbus address

lines A07 through A15 are decoded for board selection.

VMEbus Access: Address modifier bits are

jumper-selected and decoded to support both

nonprivileged short I/O, supervisory short I/O, or both.

The board is factory-configured for supervisory short I/O.

We have the same series of models in stock.  If you don't find the model you need, please contact us and we will provide you with an official quotation！

GE V7865-ACC-603-RC VME Transition Module for V7865

GE VMIVME-4116 8-channel 16-bit digital-to-analog converter board

GE VMIVME-7805 VMEBus SBC Motherboard

GE VMIVME-2128 Output Module

GE VMIVME-3123 Specifications 

GE VMIVME-7700 Ultra Low Voltage Intel® Celeron® VMEbus

GE VMIVME-5531M VMIVME-5531L Specifications

GE VMIVME-3100 analog-to-digital conversion module

GE VMIVME-2170A Isolated Digital Output Module

GE VMIVME-7740 VME Single Board Computer

GE VMIVME-2120 64-bit High-Voltage Digital Output Megamodule

GE VMIVME-4941 Quad-Channel Synchro/Resolver-to-Digital Converter

GE VMIVME-4116 8-channel 16-bit Digital-to-Analog Converter Board

GE VMIVME-7696-650  Pentium II Processor-Based VMEbus Single-Board Computer

GE VMIVME-2210 Specifications

GE VMIVME-1128 128-bit High-Voltage Digital Input Board with Built-in-Test

GE XVB603 VME Single Board Computer

GE VMIVME-4132-010 32-Channel, 12-bit Analog Output Board with Built-In-Test

GE VMIVME-2540-300  24-Channel Intelligent Counter/Controller

GE VMIVME-4514A-000 16-Channel Scanning Analog I/O Board

GE VMIACC-5595-208 Specification 

GE VMIVME-3122 High-Performance 16-bit Analog-to-Digital Converter