ABB TU847 3BSE022462R1 Module Termination Unit

REL670 now includes increased number of functional instances whereby protection of two 

overhead lines (one as main and another as backup) can be achieved using a single IED.

RET670 now includes a state-of-the art differential protection for phase-shifting transformers.

In terms of solution, the complex phase-shifting transformer is seen as a single unit and only external CTs and VTs will be required. 

The differential protection is self-adaptive to the phase angle and voltage ratio thereby making it extremely simple to configure, set and deploy.

The single phase and three phase circuit breaker failure protection are now updated with a flexibility of having several different initiation conditions.

REC670 now includes 12 instances (from earlier 6 instances) of high-impedance differential protection functions. 

This increase will now allow coverage of applications with a higher number of zones using one single IED.

All 670 series products now include current/voltage/general delta supervision functionality. 

These can be used for delta calculation including vector shift calculation using instantaneous/RMS

magnitudes for usage in applications like comparators or release conditions.

All 670 series products now include current/voltage harmonic monitoring functionality. 

These functions are useful to monitor the harmonic distortion, up to 5th harmonic, total harmonic distortion and total demand distortion.

All events are stored with a resolution of 1 ms in the central unit and in the BUs.

System, protection and test events can be generated.

Protection events refer to the protected busbar and include the changes in the disconnector and breaker positions,

trips, etc. Test events are recorded during testing with the test signal generator.

System events describe the diagnostic and fault messages of the NBP system as a whole.

Frequency protection, including overfrequency, underfrequency and frequency rate-of-change protection,

is offered in IEDs with standard configurations H and J. 

SCHENCK INTECONT FIN 050 0424 456.01

Schenck V647736.B01 Bulk Material Handling Unit with OLI 1200/2 Vibrator 

SCHENCK DISOMAT S 1TES0613 D95-09-029 0022910L #E7

SCHENCK TEMPERATURE VIBROCONTROL 2000 TM-214 MODULE 

SCHENCK 018081.07 LB 01808107 LB EXPANSION MODULE ID7702 UP TO 24 MONTHS WARR...

SCHENCK PROCESS V06400 5.B01 DISOCONT TERSUS CONTROL UNIT 

Stock Equipment Schenck Process Group 196NT Display Control Panel 1D28753-1

Fireye Control Mart 1 Rebuilt by Acme control

Fireye Communication Interface Type E500-3

Fireye Closed Wiring Base 61-3060

FIREYE Cleaver Brooks 48PT2-9007 NOS 4' 90 DEGREE HEAD  INFRARED SENSOR

Fireye Chassis MEC120D 120V 50/60Hz

Fireye CHASSIS COVER FOR SCANNER TYPE SC10L HOUSING ONLY

Fireye Cable Adapter Board & Terminal Strip  ED600 for Flame Monitor 

Fireye C9707A1023 Conformally coated  non-incendive  All Fuel scanne

FIREYE C9701A UV FLAME SCANNER

Fireye C9508M UV Flame Scanner  C9508M2000