THQL2150GFI | General Electric Molded Case

Product Description P/N: 531X191RTBALG3 DESCRIPTION / SPECIFICATIONS Description The General Electric 531X191RTBALG3 is a Relay Terminal Board from the 531X Series, providing a crucial interface for reliable relay connections in industrial systems. Technical Specifications Brand General Electric Category Drives Part Number 531X191RTBALG3 Subcategory Control/Interface Board Type PC BOARD Information About 531X191RTBALG3 The 531X191RTBALG3 card was manufactured by General Electric as a relay terminal board. As a member of GE 531X replacement drive board series, this card is outfitted to install into a number of drives and exciters across the brand. Two functions are furnished by the board for its installed host drive. Seven relay positions are available to the drive when this board is installed. The card also provides user access to the coils and contacts found on board.

Features of the relay terminal board are provided to the host drive. When installed, the terminal card offers seven relay positions for external hookups. Any attached circuits can be controlled using the 531X191RTBALG3 board. Tabulations for the RTB points and relay contacts can be calculated by the card. The card is a G3 revision of the board, offering a specific voltage and current rate different from other versions. Coils within each relay have a rating of 115 VAC, while contacts have a rating of 125 VAC or 28 VDC. Contacts also include a current rating 2.4 A, with board inrush currents of 25 mA and holding currents of 14 mA. Be sure to review all provided installation parameters before beginning to install this board. To protect the sensitive components of the board, only permit trained personnel to handle and install the 531X191RTBALG3 card. All wiring instructions should be thoroughly reviewed before beginning device installation. The corresponding device manual and datasheet contains a comprehensive wiring and installation guide. General Electric, the device鈥檚 manufacturer, was the original provider of technical support for this relay terminal board. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.