ABB INPBS01 Parallel Bus Slave Module

Parallel Bus Slave Module Manufacturers ABB, Bailey Model(s)

ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information Mounts IPSYS, IPFLD, IPMON

Estimated Shipping Size Dimensions: 2.0" x 13.0" x 7.0" (5.1 cm x 33.0 cm x 17.8 cm)

Weight: 0 lbs 8.0 oz (0.2kg )

Tariff Code: 8538907080

Country of Origin: United States Ships from Webster NY, USA

Parallel Bus Slave Module

Applications

The binary input board 23BE40 performs the following processing functions for different types of signals:

 Digital filtering to suppress contact jumping

 Suppression of technically induced chattering signals

 Intermediate position suppression and double indication monitoring

 Consistency check of all binary input channels assigned to digital measurement values

The 23BE40 has a buffer for temporarily storing 50 time-stamped event messages in chronological order, designated for transmission to the communication unit.

The board's microcontroller handles all time-critical tasks for the parameterized processing functions. In addition, it communicates interactively with the RTU560 system bus.

All configuration data and processing parameters are transmitted via the RTU560 system bus.

All configuration data and processing parameters are loaded from the communication unit via the RTU560 bus.

The board is equipped with a serial interface to the RTU560 system bus.

During initialization and operation, the board performs a series of tests. If a fault occurs, it is reported to the communication unit.

All fault conditions affecting the board's functionality are indicated as general fault signals by means of light emitting diodes (ST).

Faults in the board are detected by the communication unit.

Power Entry Circuit Breaker or Switch

The IPECB11 or IPECB13 Power Entry Circuit Breaker and IPESW11 or IPESW13 Power Entry

Switch terminate the AC or DC power input lines and provide line filtering before feeding power

to the power module chassis backplane. These devices mount on the back of the power fan chassis.

One circuit breaker or switch is used on N, N+1, and N+x redundant systems (Fig. 2); two are

used on 2N redundant systems (Fig. 3). The isolated inputs on 2N redundant systems allow for

mixed power inputs (i.e., 125 VDC and 120/240 VAC) because two separate power entry circuit

breakers or switches feed isolated power inputs to the power module chassis.