ABB IEMPU02 Industrial Modular Mounting Unit

Control functions

The control functions are used to indicate the status of switching devices, 

i.e. circuit breakers and disconnectors, and to execute open and close commands for controllable switching devices of the switchgear. 

Furthermore, there are supplementary functions for control logic purposes, e.g. on/off switches, 

MIMIC alarm LED control, numerical data for MIMIC and logic controlled control position selector. 

The control functions configured with the Relay Configuration Tool can be associated with object status indicators that 

are part of the MIMIC configuration picture displayed on the HMI. 

The object status indicators are used to indicate the status of switching devices via the MIMIC picture and to control them locally.

Support and migration of ABB S600 I/O for Advant Master DCS, local rack based I/O for Advant Controller 110 and Advant Controller 160.

The S600 I/O series serves as the local, rack-based I/O for the Advant Controller 110 and the Advant Controller 160. 

There is a full complement of S600 I/O modules to choose from for digital and analog inputs and outputs. 

The I/O range covers both D.C. and A.C., from low-cost, high-density modules to high-performance modules with kilovolt isolation. 

There is even an intelligent pulse counter module for accurate length measurement and positioning 

that can cope with pulse frequencies as high as 100 kHz. 

Available is also a rotational speed input module with on-board trip logic, 

which is suitable, for e.g. turbine control and high speed drive applications. 

Benefits that add value

Get a drive solution that meets the requirements of your application and

ensures high productivity and the optimum performance of your operations.

Benefit from the built-in expertise of our medium voltage drives and take

your business forward with everything working like clockwork.

The S100 I/O process interface modules for Advant Controller 400 series process controllers come with connection units,

simplifying cable termination and keeping noise and destructive spikes away from the central electronics.