DS2020FECNRP005A | General Electric Field Exciter Module

Product Description P/N: IC800VMCE030 DESCRIPTION / SPECIFICATIONS Description The IC800VMCE030 is a General Electric VersaMotion cable used in automation systems for reliable data transmission. It features high-quality insulation and multiple conductors to ensure stable, high-speed communication between components. Its design supports durability and signal integrity in industrial environments. Technical Specifications Part # IC800VMCE030 Category Servo Products Subcategory Servo Cable and Accessory Purpose Provides a feedback connection between servo motors and servo drive units Connector (Motor End) AMP 1-172169-9 (Mate and Lock type) Connector (Servo Drive End) Twenty (20x) terminal connector with locking screws Signal Wire Twisted-shield signal wire with a terminal Grounding Terminal connected to the ground terminal (marked) at the front of the servo drive unit Installation Place the encoder cable in separated conduits from power cables, with a separation of at least 25 cm (12 inches) to avoid signal interference Safety Precaution Do not touch any terminal or cable connected to the servo drive unit after power-off. Wait until all LED indicators are off to prevent electric shock from residual voltage.

Information About IC800VMCE030 The IC800VMCE030 is a General Electric VersaMotion cable designed for use in servo systems, specifically for connecting servo motors to servo drive units. Category: Servo Products Subcategory: Servo Cable and Accessory Purpose: This cable provides a crucial feedback connection between servo motors and their corresponding drive units, enabling accurate and reliable control of motor functions. Connector (Motor End): The cable is equipped with an AMP 1-172169-9 connector, featuring a Mate and Lock type mechanism to ensure a secure connection. Connector (Servo Drive End): At the servo drive end, the cable utilizes a 20-terminal connector with locking screws, which ensures a stable and secure connection to the drive unit. Signal Wire: The cable includes twisted-shield signal wires with terminals, designed to minimize electrical noise and interference, thereby ensuring clear and accurate signal transmission. Grounding: A terminal is provided for grounding, which connects to the marked ground terminal at the front of the servo drive unit. Proper grounding is essential for system stability and safety. Installation: For optimal performance and to prevent signal interference, it is recommended to place the encoder cable in separate conduits from power cables, maintaining a minimum separation of 25 cm (12 inches). Safety Precaution: To avoid the risk of electric shock from residual voltage, do not touch any terminals or cables connected to the servo drive unit immediately after power-off. Ensure that all LED indicators are off before handling. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.