Bently Nevada Trendmaster Online Condition Monitoring System

Overview

Trendmaster Pro is an innovative online vibration monitoring system that links hundreds of

permanently mounted transducers and measurement points to a single-cable sensor network.

It then transmits full-waveform & spectrum data to our System 1 software, with its intuitive

interface for tracking, alerting & analyzing your machinery behavior.

This online condition monitoring system is optimized for cost-effective monitoring of machines

of intermediate criticality, i.e. machines that don't demand immediate shut-down protection,

but for which monthly portables-based monitoring would be insufficient.

A highlight of this system is its suitability for use in the most hazardous environments (i.e. explosive gases).

A wide range of sensor types are supported, including vibration (Acceleration, Velocity, Displacement),

temperature (RTD & K thermocouple), Pressure, Process Variables (20mA, 5V), Rack Buffered outputs.

Each Transducer Interface Module provides 2 channels of measurement.

Trendmaster Product Features

The Trendmaster Pro online condition monitoring system is ideal for your medium criticality machines:

Dynamic Scanning Modules - Strategically placed throughout your plant, DSMs accept one to

six sensor bus cables to produce a distributed network of condition monitoring sensors.

Frequently polled - Sensors on each bus are polled sequentially every few minutes,

allowing the system to collect data from thousands of connected sensor points.

Low installation and hardware costs - innovative architecture utilizes point-to-point wiring

rather than running all field wiring all the way back to a central location.

Trendmaster System compatible Services

Globally deployed and expertly trained to get the job done

Helping customers achieve plantwide optimization for over 50 years

Our global team of experienced field engineers provides a comprehensive range of machinery 

diagnostic services (MDS) for rotating and reciprocating machinery as well as fixed asset types

—regardless of original equipment manufacturer.

From a single engineer in 1972. our MDS capabilities have grown to encompass a team of ~150

dedicated professionals today, many with decades of experience. We have completed more than

18.000 machinery diagnostic projects and the results are maintained in an extensive archive so that

lessons learned on one project benefit other projects where similar machinery problems are encountered.

Our sophisticated IT capabilities allow MDS colleagues from around the world to easily collaborate in real

time using this archive and their collective areas of expertise. This ensures that our extensive knowledge

and broad experience can be brought to bear on each problem, regardless of where the machinery is located.