Honeywell CC-IP0101 DP Gateway Module

Analogue Output Module

An optional Analogue Output Module, (Part Number 05701-A-0285),

may be factory fitted to the Single Channel Control Card and is used on a channel of gas detection to provide an isolated current loop output which follows the sensor signal level. 

This may be set electronically to produce a 0 - 20mA output or a 4 - 20mA output and

can be used to operate a chart recorder, etc.

Introduction

Emerson’s DeltaV Console.CONNECT Solution for Honeywell TDC 3000 Systems provides a pathway for Honeywell 

TotalPlant® Solution (TPS) systems to easily transition to a DeltaV system.

Honeywell TPS system users can take advantage of today’s performance enhancing technologies such as  

Electronic Marshalling, embedded advanced control, self-diagnosing instrumentation, 

on-the-fly scalability,wireless communications, digital busses, and plug-and- play business integration, without completely starting from scratch.

Sensor Drive Modules

Two sensor drive modules are provided:

a. Sensor Drive Module, 4 - 20mA, Part Number 05701-A-0283

b. Sensor Drive Module Catalytic, Part Number 05701-A-0284

The Sensor Drive Module conditions the incoming catalytic or 4 -20mA sensor signal and provides the necessary sensor power supply.

It contains all the circuitry necessary to generate the voltages and currents required to drive the sensor,

the circuitry to acquire the sensor signal and to scale the sensor signal to a standard output. 

The sensor drive modules are factory fitted and plug directly onto the channel control card.

The DeltaV Console.CONNECT solution upgrades Honeywell LCN-based consoles such as the Universal Station or 

GlobalUser Station while Honeywell controllers and I/O continue to run the process. 

The Honeywell TPS system’s analog and discrete I/O,  process control loops, and online tuning parameters are 

seamlessly viewed and operated from a state-of-the-art DeltaV operator interface.

This integrated DeltaV and Honeywell operator interface provides a basis for a low-risk, easy transformation towards a smart digital plant.

Benefits

Modern, built-for-purpose DeltaV Live Operator Interface. 

Operators can monitor and control both Honeywell and DeltaV System data from the DeltaV Live Operator Interface. 

DeltaV Live provides a complete set of high-performance tools: operator graphics, sophisticated alarm management  

and presentation, embedded historical trending and system-wide security. DeltaV Live supports industry  

standards like ISA 101.01 and industrial best practices like those defined by the Center for Operator Performance (COP). 

Predefined faceplates are designed to ease the transition for operators. Honeywell consoles can be replaced or used in 

conjunction with DeltaV Operator Stations with DeltaV Live.

Other advantageous products on sale are listed below: