MTL 8715-CA-BI Bus Interface Module (BIM)

F300 Megablocks are DIN-rail mounted, device couplers for Foundation™ fieldbus 

or Profibus PA networks. They allow connection of field devices to the segment 

trunk cable and provide short-circuit protection to the segment.

Megablocks minimize hand wiring and allow individual devices to be added to 

and removed from the segment without disrupting network communication.

Megablocks are available in four, eight, and twelve port versions. Multiple 

Megablocks are easily wired together to allow larger segments to be constructed.

Each F300 Megablock includes an F97 Terminator for installation in the trunk 

terminals, which is clearly marked with a large ‘T’ for easy identification by field 

personnel.

Individual surge-protector modules (FS32) can also be fitted to any of the 

Megablock fieldbus terminals to provide protection against induced surges and 

transients that can potentially destroy or degrade certain components inside the 

F300 Megablocks.

DESCRIPTION

Simple and reliable interconnection

Each Megablock has dedicated connections for the fieldbus “home run” or trunk 

cable. Trunk connections are identified by their black connectors. Numbered 

(grey) connectors are provided for each spur.

Wiring connections to the Megablock are made using pluggable connectors 

(screw terminal type are standard, but other connection styles are available). 

These allow wire terminations to be made to the individual connectors, which are 

then plugged into the Megablock.  Devices can be connected and disconnected 

easily during commissioning. On completion, the connector retaining screws are 

tightened to secure each connector to the Megablock

MECHANICAL

Mounting orientation

Megablocks mount vertically or horizontally on 35mm DIN rail within a field junction 

box  The use of DIN rail end stops are recommended to prevent sliding (especially for 

vertical installations).

Eight, and twelve port Megablocks have areas on their body for labelling so that 

segments can be easily identified according to plant standards.

The ATC-900 is communications ready, including Modbus RTU,

Ethernet (via external communication module), and USB for thumb

drives (memory sticks).

Functions/features/options

The primary function of the ATC-900 is to accurately monitor power

sources and provide the necessary intelligence to operate a transfer

switch in an appropriate and timely manner. In addition, the ATC-900

provides useful real-time and historical data, reliable two-way

communications, and programming through the device’s faceplate

or Modbus RTU. The ATC-900 features digital signal processor (DSP)

technology to provide and maintain superior precision and versatility

during both programming and data access.

MTU ELEKTRONIK MDEC ENGINE CONTROL UNIT 5275306860

HYUNDAI UAN50C3C M1C1S168S AIR CIRCUIT BREAKER 3 POLE 5000A

SIEMENS 6ES7 417-4HL01-0AB0 SIMATIC S7-400 CPU MODULE

ABB PP D113 B03-26-111600 3BHE023584R264 7 AC 800PEC CONTROLLER

HITACHI NICO 88A016147 CONSTANT SPEED CONTROLLER

ABB AC 800PEC CONTROLLER

HYUNDAI UAN50C3C M1C1S168S AIR FUSE 3 POLE 5000A

Modulo CPU SIEMENS 6ES7 417-4HL01-0AB0 SIMATIC S7-400

Unità Di Controllo Motore MDEC MTU ELETTRONIK 5275306860

MTU ELECTRONICS Mdec Engine Control Unit 5275306860

HITACHI NICO 88A016147 Controllore Di Velocità Costante

Interruttore Automatico Air Hyundai UAN50C3C M1C1S168S 3 Poli 5000A

ABB PP D113 B03-26-111600 3BHE023584R2647 AC 800PEC Controller