50 Pin Ribbon Cable Manufacturers ABB, Bailey Model(s)
ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90
Additional Information Used with IEPEP03/NPEP05 Power Entry Panels
Estimated Shipping Size Dimensions: 2.5" x 0.3" x 1.0" (6.3 cm x 0.6 cm x 2.5 cm)
Weight: 1 lbs 5.9 oz (0.6kg )
Tariff Code: 8537109070
Country of Origin: United States Ships from Webster NY, USA
50 Pin Ribbon Cable
OTHER INFORMAITION
• The operator panel is designed for stationary installation on a planar surface, where the following conditions are fulfilled:
– no high explosive risks
– no strong magnetic fields
– no direct sunlight
– no large, sudden temperature changes
• Install the operator panel according to the accompanying installation instructions.
• Ground the operator panel according to the accompanying installation instructions.
• Only qualified personnel may install the operator panel.
• Separate the high voltage, signal and supply cables.
• Make sure that the voltage and polarity of the power source is correct before connecting the operator panel to the power outlet.
• Peripheral equipment must be appropriate for the application and location.
• In a Zone 2 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less
than IP 54 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.
• In a Zone 22 environment, this equipment shall be installed in an enclosure that provides a degree of
protection not less than IP 64 or greater than IP 65 in accordance with IEC/EN 600079-0.
The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.
ABB HN810 Head station for LD800P |
ABB HPC800 HPC800 Controller suite Redundancy |
ABB HPC800ERA HPC800 Extended Redundancy |
ABB HPC800K01 HPC800 Controller Kit Non-redundant |
ABB HPC800K01A HPC800 Controller Kit Non-redundant |
ABB HPC800K02 HPC800 Controller suite Redundancy |
ABB HPC800K02A HPC800 Controller suite Redundancy |
ABB HVC-02B 3HNA011999-001 Robot High Voltage Board |
ABB ICSI16E1 CS31 Input/Output Module |
ABB IEMMU21 Bailey Controller Base Racks |
ABB IEPAS01 infi90 power Module |
ABB IEPAS02 infi90 power Module |
ABB IMASI23 infi90 analog output input module |
ABB IMSED01 infi90 analog output input module |
ABB INIIT13 infi90 output input Module |
ABB INIT03 infi90 output input Module |
ABB INNIS01 infi90 output input Module |
ABB INNIS21 infi90 output input Module |
ABB INNPM12 infi90 output input Module |
ABB INSEM01 infi90 output input Module |
ABB IOR800 PHBIOR8000N200 S800 I/O Gateway Module |
ABB IOR810 S800 I/O Gateway ModuleHN800 |
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved