ABB 1948850A2 DIP Shunt Circuit

DIP Shunt Circuit Manufacturers ABB, Bailey Model(s)

ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information Used with IEPEP03/NPEP05 Power Entry Panels

Estimated Shipping Size Dimensions: 1.0" x 1.0" x 12.0" (2.5 cm x 2.5 cm x 30.5 cm)

Weight: 0 lbs 1.1 oz (0.0kg )

Tariff Code: 8537109070

Country of Origin: United States Ships from Webster NY, USA

DIP Shunt Circuit

OTHER INFORMAITION

• The operator panel is designed for stationary installation on a planar surface, where the following conditions are fulfilled: 

– no high explosive risks 

– no strong magnetic fields 

– no direct sunlight 

– no large, sudden temperature changes 

• Install the operator panel according to the accompanying installation instructions. 

• Ground the operator panel according to the accompanying installation instructions. 

• Only qualified personnel may install the operator panel. 

• Separate the high voltage, signal and supply cables. 

• Make sure that the voltage and polarity of the power source is correct before connecting the operator panel to the power outlet. 

• Peripheral equipment must be appropriate for the application and location. 

• In a Zone 2 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less 

than IP 54 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into. 

• In a Zone 22 environment, this equipment shall be installed in an enclosure that provides a degree of 

protection not less than IP 64 or greater than IP 65 in accordance with IEC/EN 600079-0.

The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.