H&B Contronic XU 04 (XU04) Module XU 04 H&B Contronic

H&B Contronic XU 04 Module Manufacturers ABB, Hartmann & Braun Model(s)

ABB H&B Contronic Additional Information H&B Contronic XX02 Module

Estimated Shipping Size Dimensions: 8.0" x 2.0" x 5.0" (20.3 cm x 5.1 cm x 12.7 cm)

Weight: 0 lbs 12.9 oz (0.4kg )  XU 04

Wireless Controller ARC600 provides a complete solution for

monitoring and controlling field devices. A secure

communication channel can be formed for remote serial

(RS-232/RS-485) or Ethernet field devices over a GPRS, 3G

or LTE connection. ARC600 makes it possible to have cost

effective communication networks over long distances at high data rates.

Several interfaces are available for field device connectivity:

digital inputs and outputs, analog inputs, serial and Ethernet

ports. Industrial protocols IEC-104. IEC-101 and Modbus

TCP are supported for the SCADA connectivity. The inputs

and outputs of ARC600 can be accessed and controlled with

the IEC-104 and IEC-101 protocols.

With the Wireless Controller ARC600 protocol conversion

feature, conventional IEC-101. Modbus RTU and Modbus

TCP devices can be connected in a reliable way to modern

TCP/IP based IEC-104 control systems.

Modbus to IEC-104 conversion

ARC600 provides support for generic Modbus RTU and

Modbus TCP devices such as ABB's RIO600. In addition,

support is also provided for the preselected Modbus

parameters for Fault Passage Indicators (FPI). Currently,

Horstmann Compass B and Kries IKI-50 are supported.

Another advantage of the local protocol conversion is an

advanced data acknowledgement mechanism. IEC-104

allows multiple packets, and multiple events in a single

packet, to be acknowledged collectively and the packets can

be buffered up to the time of acknowledgement from SCADA.

• Fault passage indication

• Additional push buttons for local control

• Microswitch for door alarm (standard feature for GAO)

• Fixing accessories for mounting on top of

switchgear or floor mounting (GAI)

• Auxiliary contacts for micro circuit breakers (MCB)s

• Fused supply socket

• Control circuit 48 VDC

• Service light

• Fused 12 VDC supply for additional radio equipment

• Different antenna options depending tocustomer specification

• Surge protection T1+T2

• Low auxiliary voltage indicator

• Low-voltage measurements (GAI)

• Communication with MV/LV measurement equipment (GAI)

• Connection interface for additional motor

operating cabinets (GAO)

• Different battery management options for

monitoring the battery health wireless networks