The IED offers directional and non-directional overcurrent and thermal overload protection as
well as directional and non-directional earth-fault protection.
Some standard configurations allow as an option admittance-based, harmonics-based or wattmetric-based earth-fault protection to be
used in addition to directional earth-fault protection.
Further, the IED features sensitive earth-fault protection, phase discontinuity protection, transient/intermittent earth-fault protection,
overvoltage and undervoltage protection, residual overvoltage protection, positive-sequence undervoltage
and negativesequence overvoltage protection.

Event recording
All events are stored with a resolution of 1 ms in the central unit and in the BUs.
System, protection and test events can be generated.
Protection events refer to the protected busbar and include the changes in the disconnector and breaker positions,
trips, etc. Test events are recorded during testing with the test signal generator.
System events describe the diagnostic and fault messages of the NBP system as a whole.
Frequency protection, including overfrequency, underfrequency and frequency rate-of-change protection,
is offered in IEDs with standard configurations H and J.
The IED also incorporates optional three-pole multi-shot auto-reclose functions for overhead line feeders.
Enhanced with optional hardware and software,the IED also features three light detection channels
for arc fault protection of the circuit breaker, busbar and cable compartment of metalenclosed indoor switchgear.
The arc-fault protection sensor interface is available on the optional communication module.
Fast tripping increases staff safety and security and limits material damage in an arc fault situation.
MODICON-AEG 170-BDI-546-50 INPUT MODULE,AC 120V 2X8
AEG Modicon Cutter Electric PLC A120 ALUMINIUM Central Unit ALUMINIUM200 PC-BALU-200
Modicon Micro AEG 110 CPU31100 PLC Controller
AEG Modicon PLC Signal Converter Interface RS232 --> LS UVL842 UVL 842
AEG Modicon PLC Signal Converter Interface RS232 --> LS UVL841 UVL 841
AEG Modicon Cutter Electric Central Unit ALU200L PC-ALU-200L
AEG Modicon Cutter Electric Central Unit ALU200 AS-BALU-200
Aeg Control 6051-042.23964 2 System ALU 150 CPU Dws451/99de Revision 12
DAP216N AEG Modicon/ AS-BDAP-216N digital output 2x8 24VDC, 0.5A current FR
Modicon AEG 0984-385 120/240V
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
wechat/whatsapp:
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved