ABB REM615 HCMJAEADABC2BNN11E CONTROL RELAY

Protection functions

The IED offers directional and non-directional overcurrent and thermal overload protection as

well as directional and non-directional earth-fault protection. 

Some standard configurations allow as an option admittance-based, harmonics-based or wattmetric-based earth-fault protection to be

used in addition to directional earth-fault protection. 

Further, the IED features sensitive earth-fault protection, phase discontinuity protection, transient/intermittent earth-fault protection, 

overvoltage and undervoltage protection, residual overvoltage protection, positive-sequence undervoltage 

and negativesequence overvoltage protection. 

The outstanding I/O capability in REC670 enables control of several bays with complete measurement with only one IED. 

For instance, one REC670 IED is capable of handling control of all apparatuses 

in one entire diameter in 1 ½ breaker arrangement including breaker failure protection for all breakers.

Document conventions

A particular convention may not be used in this manual.

• Abbreviations and acronyms in this manual are spelled out in the glossary. The

glossary also contains definitions of important terms.

• Push-button navigation in the LHMI menu structure is presented by using the push-button icons.

To navigate between the options, use and .

• HMI menu paths are presented in bold.

Select Main menu/Settings.

• LHMI messages are shown in Courier font.

To save the changes in non-volatile memory, select Yes and press .

• Parameter names are shown in italics.

The function can be enabled and disabled with the Operation setting.

• Parameter values are indicated with quotation marks.

The corresponding parameter values are "On" and "Off".

• IED input/output messages and monitored data names are shown in Courier font.

When the function starts, the START output is set to TRUE.

APPLICATION

The REF543KM127AAAA is a feeder terminal produced by ABB that is used in a wide range of applications. 

Designed for protection, control, measurement and monitoring of medium voltage networks,

the device can be used with different types of switchgear, such as single bus, 

dual bus and dual machine systems, and supports a variety of network types, including isolated neutral networks,

resonant ground networks and partially grounded networks.

It is especially suitable for the protection and control of medium-sized three-phase asynchronous motors, 

as well as the protection and control of shunt capacitor banks for reactive power compensation.