Prosoft PLX31-EIP-PND EtherNet/IP™ to PROFINET® IO Device Gateway

The PROFINET device to Modbus Serial gateway offers bi-directional data

transfers between a PROFINET Controller and Modbus serial (RTU and

ASCII) devices. Each Modbus serial port can be configured as either a

Modbus master or slave. The PROFINET interface operates as a PROFINET

Class A device (slave).

The PLX31-PND-MBS4 gateway is a stand-alone DIN-rail mounted unit that

provides Ethernet connectivity for network communications, remote

configuration, and diagnostics. The onboard SD Card slot (SD card optional) is

used for storing configuration files that can be used for recovery, transferring

the configuration to another gateway, or general configuration backup.

Features

 PROFINET v2 certification with PROFINET class A compliance.

 Field-proven with thousands of Modbus serial devices, and multiple PROFINET

controllers from multiple vendors.

 Remotely view and diagnose Modbus and PROFINET networks.

 Remote configuration via the free, intuitive, ProSoft Configuration Builder

(PCB) software.

 Each Modbus serial port supports master or slave mode.

 Secure module configuration via module switch (v1.04 and greater).

 Up to 10.000 16-bit registers can be used to exchange large amounts of data.

The EtherNet/IP to PROFINET device gateway offers bi-directional data

transfers between a PROFINET Controller and EtherNet/IP networks. The

PLX32-EIP-PND gateway is a stand-alone DIN-rail mounted unit that provides

two Ethernet ports, with each port using a different subnet.

The onboard SD Card slot (SD card optional) is used for storing configuration

files that can be used for recovery, transferring the configuration to another

gateway, or general configuration backup. The EtherNet/IP Driver uses Class 1

I/O connections or Class 3 Message instructions. The PROFINET driver

operates as a PROFINET Class A device.

Features

 ODVA Approved

 PROFINET v2 certification with PROFINET Class A compliance

 EtherNet/IP and PROFINET certifications ensure the device is compatible with their respective network

 Field-tested with multiple PROFINET controllers from multiple vendors

 Remotely view and diagnose EtherNet/IP and PROFINET networks

 Embedded EDS AOP provided to allow for seamless integration to Studio 5000 and RSLogix 5000

 Using EtherNet/IP I/O connections, no ladder programming is required

 Multiple I/O connections to allow for increased throughput

 Secure module configuration via module switch (v1.04 and greater)

 Up to 10.000 16-bit registers can be used to exchange large amounts of dat

Bently 108M3240 SCOUT140-Exfour-channelportable datacollector

Bently 108M4049-02 SCOUTprogrammedUSBthumbdrive

Bently ACCL0547 Straightaccelerometer

Bently ACCL0561 Right-angledaccelerometer

Bently 108M4044 ACpoweradapter

Bently CABB0560 BNCtoBNCCable,1meter

Bently CABU0213 USBdatatransfercable

Bently CBCC0027 Coiledcable

Bently CBTB0278 TripleBNCadapter

Bently CBVB0032 SCOUTinstrumentcarryingbag

Bently DCCA0041 DCcaradapter

Bently MAGF0104 Accelerometermagneticbase

Bently TTL70259 LEMO-BNCTTLTach/Keyphasorcable