ABB NKAS01-3 Analog Module Termination Cable

Analog Module Termination Cable Manufacturers ABB Model(s) ABB Bailey Infi 90

ABB Bailey Infi 90 and Net 90

Additional Information 33 foot length

Estimated Shipping Size Dimensions: 16.0" x 4.0" x 96.0" (40.6 cm x 10.2 cm x 243.8 cm)

Weight: 3 lbs 0.0 oz (1.4kg )

Tariff Code: 8544429000

Country of Origin: United States Ships from Webster NY, USA

Analog Module Termination Cable

• Termination for up to sixteen (16) TC / mV process signals within a Vertical column.

• All SD I/O modules & bases of all types (Singular or Redundant) AND (Compact or Full-size), are 100% fully compatible with each other. 

Thus, Singular & Redundant, Compact or Full-size I/O modules can be mounted within a single, common HN800 I/O bus.

• Optional mechanical keying can be implemented to prevent insertion of the wrong I/O module type.

• Latching device on the base locks the base into position on DIN-Rail.

• Industry standard 35-mm DIN rail, Vertical Column mounting.

Features and benefits

Termination for up to sixteen (16) analog I/O process signals within a horizontal row.

All SD I/O modules & bases of all types (Singular or Redundant) AND (Compact or Full-size), are 100% fully compatible with each other. 

Thus, Singular & Redundant, Compact or Full-size I/O modules can be mounted within a single, common HN800 I/O bus.

Optional mechanical keying can be implemented to prevent insertion of the wrong I/O module type.

Latching device on the base locks the base into position on DIN-Rail.

Industry standard 35-mm DIN rail, Horizontal row mounting.

Furthermore, the anti-pumping device only allows circuit-breaker closure if the following conditions 

are present at the same time:

 1. Closing spring fully charged

 2. Opening mechanical pushbutton and/or opening release coils (-MO1/-MO2) are not active.

 3. The circuit breaker is in the Open position.

The AI01 Analog Input module processes up to 16 high level, group isolated, Analog Input field signals.

Each channel is independently configurable. FC 221 (I/O Device Definition) sets AI module 

operating parameters and each input channel is configured using FC 222 (Analog Input Channel) to 

set indivdual input channel parameters such as engineering units, High/Low alarm limits, etc. 

The AI01 Analog Input module supports several high level signal ranges.

A/D resolution of each channel is configurable from 12 to 16 bits with polarity. 

The AI01 module has two A/D converters, each with 8 input channels. 

The module will update each configured CH in 22.5 msec, for a total of 180 msec if all 16 channels are configured.

In current mode, the AI01 module provides short circuit protection by limiting current to 96 mA. 

The AI01 module will also detect an open circuit in less than 15 seconds.