GE IS400JPDGH1A Power Distribution Terminal Board

Peer to peer communication

SafetyNet Controllers can communicate with one another via Ethernet using SafetyNet

P2P - which has been certified as suitable for use in SIL 2 applications. Robust checks and

controls on access and data corruption ensure the safety of communication and

allow safety functions for which the inputs and outputs are widely separated to be

easily implemented - both in terms of the software programming and in the hardware design.

Features

• PAC8000 I/O is a completely modular I/O solution for both general purpose and hazardous area applications. It offers a wide variety of I/O functions, and has an open architecture that allows communication with a variety of different field-buses by selecting the appropriate type of Bus Interface Module (BIM) or Controller.

• Field terminals (one per I/O module) snap onto the carrier and accept field wiring without the need for additional terminals or connections. They can be changed easily if damaged in the field. A comprehensive mechanical keying system ensures that equipment safety is maintained.

• Carriers form PAC8000s physical and electrical backbone by providing a mounting onto a flat panel or T- or G-section DIN rail. They support and interconnect the BIM or Controller, power supplies, I/O modules and field terminals, and carry the address, data and power lines of the internal Railbus

• Returns commoned internally

• Pulse counting option

• 24 V dc bussed field power required