Power Engineering 
K-JIANG
Product
Article
NameDescriptionContent
English 简体中文
  • Kollmorgen AKT2G-ENC-180-000 1-Channel Incremental Encoder Interface
  • Kollmorgen AKT2G-ENC-190-000 Incremental Encoder Interface with Differential Input
  • Kollmorgen AKT2G-AT-425-000 4 Ch Analog Outputs 0-10 and -10 to +10 Vdc
  • Kollmorgen AKT2G-AT-410-000 4 Ch Analog Outputs 0-10 and -10 to +10 Vdc
  • Kollmorgen AKT2G-SDO-004-000 4-channel digital output terminal, Safety
  • Woodward Gas Stop/Ratio Valve
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1814 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
  • Beckhoff EK1501-0100 | EtherCAT Coupler, media converter
  • Beckhoff EK1501-0010 | EtherCAT Coupler with ID switch, single-mode fiber optic
  • Beckhoff EK1501 | EtherCAT Coupler with ID switch, multi-mode fiber optic
  • Beckhoff EK1300 | EtherCAT P coupler
  • Beckhoff EK1122-0080 | 2-port EtherCAT junction, Fast Hot Connect
  • Beckhoff EK1122-0008 | 2-port EtherCAT junction with M8 connection
  • Beckhoff EK1121-0010 | 1-port EtherCAT junction, Extended Distance
  • Beckhoff EK1110-0043 | EtherCAT EJ coupler, CX and ELterminal connection
  • Beckhoff EK1110-0044 | EtherCAT EJ coupler, CX and EL terminal connection, EtherCAT junction
  • Beckhoff EK1110-0008 | EtherCAT extension with M8 connection
  • Beckhoff EC1110 | EtherCAT Terminal extension, RJ45, angled, push-in
  • Beckhoff CU8130-0240 | UPS modul, battery-backed
  • Beckhoff CU8130-0120 | UPS module, battery-backed
  • Beckhoff CU8110-0120 | UPS module, capacitive
  • Beckhoff CU8110-0060 | UPS module, capacitive
  • Beckhoff CX2072 | Embedded PC with Intel® Xeon® D-1567
  • Beckhoff CX2062 | Embedded PC with Intel® Xeon® D-1548
  • Beckhoff CX2042 | Embedded PC with Intel® Xeon® D-1527
  • Beckhoff CX2043 | Embedded PC with AMD Ryzen™ V1807B
  • Beckhoff CX2033 | Embedded PC with AMD Ryzen™ V1202B
  • Beckhoff CX20x3 | Embedded PC series
  • BAUMULLER b maXX 1000 Frequency converter
  • BAUMULLER b maXX 2400 Mini servo controller up to 2 kW
  • BAUMULLER b maXX 3300 Servo controller up to 5 kW
  • BAUMULLER b maXX 4600/4700 Peak and nominal load devices
  • BAUMULLER b maXX 4100 Regenerative power supply unit
  • BAUMULLER b maXX 4400 – The modular servo controller
  • BAUMULLER b maXX-drivePLC
  • BAUMULLER b maXX 4000 Modular servo controller
  • BAUMULLER b maXX 5600/5700 The application specific servo drive
  • BAUMULLER b maXX 5000 The safe, modular servo controller
  • Kollmorgen EtherCAT® Bus Coupler Features
  • LENZE i950 cabinet servo inverter
  • LENZE i750 cabinet servo inverter
  • LENZE i700 cabinet servo inverter
  • LENZE i650 motec frequency inverter
  • LENZE i550 motec frequency inverter
  • LENZE i550 protec frequency inverter
  • LENZE x500 IoT gateway
  • Beckhoff CX5630 | Embedded PC with AMD Ryzen™ R1505G
  • Beckhoff CX5620 | Embedded PC with AMD Ryzen™ R1102G
  • Beckhoff CX56x0 | Embedded PC series
  • Beckhoff CX5340 | Embedded PC withIntel Atom® x6425RE
  • Beckhoff CX53x0 | Embedded PC series
  • Beckhoff CX2500-M510 | Fieldbus master module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-M310 | Fieldbus master module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B510 | Fieldbus slave module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B310 | Fieldbus slave module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX52x0 | Embedded PC series
  • Beckhoff CX5140 | Embedded PC with Intel Atom® E3845
  • Beckhoff CX9240 | Embedded PC with Arm® Cortex®-A53
  • Beckhoff CX9020 | Embedded PC with Arm® Cortex®-A8
  • Beckhoff CX8290 | Embedded PC with Arm® Cortex®-A53 and 2-port Ethernet switch
  • Beckhoff CX8280 | Embedded PC with Arm® Cortex®-A53 and RS232/RS485
  • Beckhoff CX8210 | Embedded PC with Arm® Cortex®-A53 and EtherCAT slave
  • Beckhoff CX82xx | Embedded PC series, compact PLC
  • Beckhoff CX8191 | Embedded PC with Arm® Cortex®-A9 and BACnet/IP
  • Beckhoff CX7000 | Embedded PC with Arm® Cortex®-M7 and integrated I/Os
  • LENZE I/O system 1000
  • Schneider SAITEL Remote Terminal Unit & Controller
  • Schneider Saitel DP platform M586A0000y / SM_DO16R
  • LENZE C250-S Safety Controller
  • LENZE c520/c550/c750 controllers Powerful – everything under control
  • LENZE C550 Controller
  • LENZE C520 Controller
  • LENZE C430 Controller
  • LENZE c430/c520/c550 controller Powerful – everything under control
  • Omron B7AM-8B16 Mixed I/O Link Module
  • Kollmorgen SN3/SN4 Series AC Synchronous Motors
  • Kollmorgen Direct Drive Linear Motors
  • Kollmorgen Housed D & DH Housed Direct Drive Rotary (DDR) motors
  • Kollmorgen Cartridge DDR® Servo Motors
  • Kollmorgen STF Washdown Motor - Food Grade
  • Kollmorgen AKMA Servo Motors
  • Kollmorgen AKM™ Washdown and Food Grade Servo Motors
  • Kollmorgen AKM™ Series Servo Motor
  • SAACKE FMB-VM Fired Marine Boiler
  • SAACKE SKVJG-M Marine burners
  • B&R X20 system Slice-based I/O and control
  • Triconex Tricon Fault-Tolerant Controller
  • Triconex by Schneider Electric Tricon™ v9–v11 Systems
  • B&R X20cBB80 X20 Base module
  • GE ENERGY HYDRAN H201Ci-1 One-Channel Controller
  • B&R X20cBC0087 Bus controller
  • B&R X20cBC0083 X20 Bus Controller
  • B&R X20cBC0043-10 Bus controller CANopen slave
  • B&R Protected against harsh environmental conditions - Coated X20 system
  • KEBA KePlast i1200 Steuerungssystem der neuen Generation für hydraulische pritzgießmaschinen
  • KEBA KePlast i1100 Optimized performance for standard hydraulic IMMs
  • KePlast i-series The scalable automation solution for injection molding machines
  • KEBA KeView Visualization software
  • KEBA KeTop Reel The automatic cable retraction system
  • KEBA KeTop CB310 Connection options
  • KEBA KeTop T55 Handheld terminal
  • KEBA KeTop T20 eco / techno Handheld terminal
  • KEBA KeTop T10 directMove Operate robots quickly and easily using intuitive gestures
Home ⊙ Product ⊙ GE IS200SPROH2A MARK VI GE PPRO TERMINAL BOARD
Current Location:

E-mail

Password
Register Forgot password?
GE IS200SPROH2A MARK VI GE PPRO TERMINAL BOARD
❤ Add to collection

GE IS200SPROH2A MARK VI GE PPRO TERMINAL BOARD

IS200SPROH2A
U.S.＄10055.00
U.S.＄4548.00
Weight：0.000KG
Quantity：
(Inventory: 1)
Buy now
Add to cart
Feature
IS200SPROH2A

Part Number IS200SPROH2A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockIS200SPROH2A is an Emergency Protection Terminal Board manufactured by General Electric as part of the mark VIe series used in gas turbine control systems. An I/O pack for PPRO or YPRO is hosted on the Emergency Protection (SPRO) terminal board. It includes two potential transformers (PTS) for the bus and generator voltage inputs and conditions speed signal inputs for the I/O pack. It has a DC-37 pin connector right next to the PPRO or YPRO I/O pack connector that will accept a cable going to a terminal board for a backup trip relay. In a Mark VIe or Mark VleS control system, the backup protection is formed by the SPRO and PPRO/YPRO with wiring into a tip relay board.

PTUR or YTUR, TTUR, and a primary trip relay terminal board offer primary protection. The SPRO provides a DC-37 connector for a cable to connect to the chosen backup trip relay terminal board, and it accepts the direct installation of one PPROH1A or YPROS1A. The following table lists the trip boards that SPRO is cable compatible with. INSTALLATION: A sheet metal carrier that is mounted on a DIN-rail carries the SPRO and a plastic insulator. The SPRO and insulator can also be mounted on a sheet metal assembly that bolts into a panel. The normal #18 AWG wires are used to connect speed signals and PT inputs directly to the terminal block. For board replacement, the SPROIA barrier terminal block is detachable. The terminals of the SPRO2A Euro-block style terminal block can be taken out to replace a board. Mounting the 1/0 pack on connector JAI of the SPRO is a direct process.

The other end of a DC-37 pin conductor cable is connected to the chosen backup trip terminal board, while one end is plugged into connector JA3 of SPRO. OPERATION: The PT inputs to SPRO are shown on terminals 1-4 in the following figure. On terminals 19 24, three-speed inputs TEL:+8618144100983 are presented. The JAI I/O pack connector is connected to terminals 7 through 15, which are set aside for future control feature extension. There is no board connection at terminals 5 6, and 16 18.

The I/O pack and the trip terminal board cables are located at the JAI and JA3 connectors. DIAGNOSTICS: Electronic ID components on the SPRO board and backup trip relay terminal board are scanned during power initiation. PPRO or YPRO use this data to verify a working hardware configuration before starting regular operation. CONFIGURATION: The board doesn't have any jumpers or hardware settings.

  • Woodward Gas Stop/Ratio Valve
  • Beckhoff EK1818 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1814 | EtherCAT Coupler with integrated digital inputs/outputs
  • Beckhoff EK1541 | EtherCAT Coupler with ID switch, plastic optical fiber
  • Beckhoff EK1501-0100 | EtherCAT Coupler, media converter
  • Beckhoff EK1501-0010 | EtherCAT Coupler with ID switch, single-mode fiber optic
  • Beckhoff EK1501 | EtherCAT Coupler with ID switch, multi-mode fiber optic
  • Beckhoff EK1300 | EtherCAT P coupler
  • Beckhoff EK1122-0080 | 2-port EtherCAT junction, Fast Hot Connect
  • Beckhoff EK1122-0008 | 2-port EtherCAT junction with M8 connection
  • Beckhoff EK1121-0010 | 1-port EtherCAT junction, Extended Distance
  • Beckhoff EK1110-0043 | EtherCAT EJ coupler, CX and ELterminal connection
  • Beckhoff EK1110-0044 | EtherCAT EJ coupler, CX and EL terminal connection, EtherCAT junction
  • Beckhoff EK1110-0008 | EtherCAT extension with M8 connection
  • Beckhoff EC1110 | EtherCAT Terminal extension, RJ45, angled, push-in
  • Beckhoff CU8130-0240 | UPS modul, battery-backed
  • Beckhoff CU8130-0120 | UPS module, battery-backed
  • Beckhoff CU8110-0120 | UPS module, capacitive
  • Beckhoff CU8110-0060 | UPS module, capacitive
  • Beckhoff CX2072 | Embedded PC with Intel® Xeon® D-1567
  • Beckhoff CX2062 | Embedded PC with Intel® Xeon® D-1548
  • Beckhoff CX2042 | Embedded PC with Intel® Xeon® D-1527
  • Beckhoff CX2043 | Embedded PC with AMD Ryzen™ V1807B
  • Beckhoff CX2033 | Embedded PC with AMD Ryzen™ V1202B
  • Beckhoff CX20x3 | Embedded PC series
  • BAUMULLER b maXX 1000 Frequency converter
  • BAUMULLER b maXX 2400 Mini servo controller up to 2 kW
  • BAUMULLER b maXX 3300 Servo controller up to 5 kW
  • BAUMULLER b maXX 4600/4700 Peak and nominal load devices
  • BAUMULLER b maXX 4100 Regenerative power supply unit
  • BAUMULLER b maXX 4400 – The modular servo controller
  • BAUMULLER b maXX-drivePLC
  • BAUMULLER b maXX 4000 Modular servo controller
  • BAUMULLER b maXX 5600/5700 The application specific servo drive
  • BAUMULLER b maXX 5000 The safe, modular servo controller
  • Kollmorgen EtherCAT® Bus Coupler Features
  • LENZE i950 cabinet servo inverter
  • LENZE i750 cabinet servo inverter
  • LENZE i700 cabinet servo inverter
  • LENZE i650 motec frequency inverter
  • LENZE i550 motec frequency inverter
  • LENZE i550 protec frequency inverter
  • LENZE x500 IoT gateway
  • Beckhoff CX5630 | Embedded PC with AMD Ryzen™ R1505G
  • Beckhoff CX5620 | Embedded PC with AMD Ryzen™ R1102G
  • Beckhoff CX56x0 | Embedded PC series
  • Beckhoff CX5340 | Embedded PC withIntel Atom® x6425RE
  • Beckhoff CX53x0 | Embedded PC series
  • Beckhoff CX2500-M510 | Fieldbus master module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-M310 | Fieldbus master module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B510 | Fieldbus slave module CANopen for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX2500-B310 | Fieldbus slave module PROFIBUS for CX20xx, CX52x0, CX53x0, CX56x0
  • Beckhoff CX52x0 | Embedded PC series
  • Beckhoff CX5140 | Embedded PC with Intel Atom® E3845
  • Beckhoff CX9240 | Embedded PC with Arm® Cortex®-A53
  • Beckhoff CX9020 | Embedded PC with Arm® Cortex®-A8
  • Beckhoff CX8290 | Embedded PC with Arm® Cortex®-A53 and 2-port Ethernet switch
  • Beckhoff CX8280 | Embedded PC with Arm® Cortex®-A53 and RS232/RS485
  • Beckhoff CX8210 | Embedded PC with Arm® Cortex®-A53 and EtherCAT slave
  • Beckhoff CX82xx | Embedded PC series, compact PLC
  • Beckhoff CX8191 | Embedded PC with Arm® Cortex®-A9 and BACnet/IP
  • Beckhoff CX7000 | Embedded PC with Arm® Cortex®-M7 and integrated I/Os
  • LENZE I/O system 1000
  • Schneider SAITEL Remote Terminal Unit & Controller
  • Schneider Saitel DP platform M586A0000y / SM_DO16R
  • LENZE C250-S Safety Controller
  • LENZE c520/c550/c750 controllers Powerful – everything under control
  • LENZE C550 Controller
  • LENZE C520 Controller
  • LENZE C430 Controller
  • LENZE c430/c520/c550 controller Powerful – everything under control
  • Omron B7AM-8B16 Mixed I/O Link Module
  • Kollmorgen SN3/SN4 Series AC Synchronous Motors
  • Kollmorgen Direct Drive Linear Motors
  • Kollmorgen Housed D & DH Housed Direct Drive Rotary (DDR) motors
  • Kollmorgen Cartridge DDR® Servo Motors
  • Kollmorgen STF Washdown Motor - Food Grade
  • Kollmorgen AKMA Servo Motors
  • Kollmorgen AKM™ Washdown and Food Grade Servo Motors
  • Kollmorgen AKM™ Series Servo Motor
  • SAACKE FMB-VM Fired Marine Boiler
  • SAACKE SKVJG-M Marine burners
  • B&R X20 system Slice-based I/O and control
  • Triconex Tricon Fault-Tolerant Controller
  • Triconex by Schneider Electric Tricon™ v9–v11 Systems
  • B&R X20cBB80 X20 Base module
  • GE ENERGY HYDRAN H201Ci-1 One-Channel Controller
  • B&R X20cBC0087 Bus controller
  • B&R X20cBC0083 X20 Bus Controller
  • B&R X20cBC0043-10 Bus controller CANopen slave
  • B&R Protected against harsh environmental conditions - Coated X20 system
  • KEBA KePlast i1200 Steuerungssystem der neuen Generation für hydraulische pritzgießmaschinen
  • KEBA KePlast i1100 Optimized performance for standard hydraulic IMMs
  • KePlast i-series The scalable automation solution for injection molding machines
  • KEBA KeView Visualization software
  • KEBA KeTop Reel The automatic cable retraction system
  • KEBA KeTop CB310 Connection options
  • KEBA KeTop T55 Handheld terminal
  • KEBA KeTop T20 eco / techno Handheld terminal
  • KEBA KeTop T10 directMove Operate robots quickly and easily using intuitive gestures
  • KEBA KeTop T10 directMove Handheld terminal
  • KEBA KeTop Operation & Monitoring
  • KEBA KeTop AP500 Multi-touch panel with realtime capability
  • KEBA Stationary operation
  • Emerson Eddy Current Displacement Transducer Specifications
  • EATON XV-102 HMI/HMI-PLC Touch Panel
  • Eaton Power Xpert quality event analysis system Beyond metering
  • Eaton Power Xpert® Multi-Point Meter
  • Eaton PXQ Event Analysis System Technical Datasheet
  • Nidec Commander S100 Variable Speed A.C drive for induction motors
  • TMEIC High-voltage motors 21-L series
  • TMEIC MV Motor & Drive Solutions for Power Generation
  • TMEIC AC Motors Rolling Mills
  • TMEIC TMdrive®-70 Medium Voltage 3-Level IEGT System Drive
  • TMEIC TMdrive®-70e2 Medium Voltage 3-Level IEGT System Drive
  • TMEIC TMdrive-MVe2 Reactive Power Control
  • TMEIC Unified Controller nv Series
  • TMEIC TMdrive®-30 Medium Voltage 3-Level IGBT System Drive
  • Nidec KBDA Digital AC Drive with CSP™*
  • Nidec KBMA Hybrid Drive™ A Digital AC Drive with Analog Interface
  • KBWA Hybrid Drive A Digital AC Drive with Analog Interface
  • KBVF Hybrid Drive™ A Digital AC Drive with Analog Interface
  • Nidec KBVF Micro AC drive
  • Nidec Unidrive M608 Industrial general-purpose drive
  • Nidec Unidrive M400 General Purpose AC Drives Series
  • Nidec Unidrive HS30 General Purpose AC Drives
  • Nidec NE200 & NE300 High Performance Vector Control Drives
  • Nidec Commander C Drive
How to install and debug this product? Matters needing attention
Where can I download the manual and programming software?
Is it in stock or need to be ordered?
Can you provide technical service?
Where can I order this series?
Do you have product selection list and pre-sale service?