Bailey Infi 90 Analog Input Slave Module Manufacturers ABB, Bailey Model(s)
ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90
Additional Information Special Version; Ignore rear panel label it is wrong per RC
Estimated Shipping Size Dimensions: 2.0" x 13.0" x 8.0" (5.1 cm x 33.0 cm x 20.3 cm)
Weight: 0 lbs 15.0 oz (0.4kg )
Bailey Infi 90 Analog Input Slave Module
Characteristics
Ethernet ports are labeled 1 through 4 for documentation purposes.
SDSL ports are connected via the backplane. There are no specific uplink ports.
All ports are functionally identical.
The link and speed status of each Ethernet port and SDSL port is indicated by status indicators .
The switch learns Ethernet addresses by analyzing incoming frames and stores them in a lookup table ,
used to forward frames only to the correct port. If the frame is
widecast or multicast, or the destination address is not found in the lookup table, the received frame is forwarded to the correct port.
If an entry in the lookup table is not refreshed by an incoming frame with a specific source address
then it is aged out for a maximum of 304 seconds.
Maximum 304 seconds (default, configurable).
For IEEE 802.1Q VLAN frames, the switch can be configured in VLAN or transparent mode. In transparent mode
the switch does not change any frames or frame TAGs; in VLAN
mode, the switch can be configured to support a variety of applications, such as
trunking or access ports.
The switch will support quality of service if it uses an IEEE 802.1p-compliant frame format.
The switch can support quality of service if the frame format is IEEE 802.1p compliant. The switch can divide frames
into up to four queues, which can be configured as priority queues or weighted fair queues.
The switch uses a 5 V supply voltage, which can be set as the internal RTU power supply or via a jumper.
It can be set to internal RTU power or external power via jumpers.
The components themselves, the Ethernet ports, as well as the SDSL
connections and RS232 interfaces are hot-swappable.
Use the 560NMS24 unit as a repeater for longer distance transmission.
User name | Member Level | Quantity | Specification | Purchase Date |
---|
wechat/whatsapp:
+86-181-4410-0983
Email: kongjiangauto@163.com
Copyright © 2009 - 2024 Cld , All Rights Reserved K-JIANG All rights reserved