ABB IMASM01 Analog Input Slave Module

Analog Input Slave Module Manufacturers ABB, Bailey Model(s)

ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90

Additional Information Special Version; Ignore rear panel label it is wrong per RC

Estimated Shipping Size Dimensions:7.0" x 2.0" x 13.0" (17.8 cm x 5.1 cm x 33.0 cm) 

Weight: 0 lbs 9.0 oz (0.3kg )

Tariff Code: 8538907080

Country of Origin: United States Ships from Webster NY, USA

Analog Input Slave Module

Characteristics

Ethernet ports are labeled 1 through 4 for documentation purposes.

SDSL ports are connected via the backplane. There are no specific uplink ports.

All ports are functionally identical.

The link and speed status of each Ethernet port and SDSL port is indicated by status indicators .

The switch learns Ethernet addresses by analyzing incoming frames and stores them in a lookup table ,

used to forward frames only to the correct port. If the frame is

widecast or multicast, or the destination address is not found in the lookup table, the received frame is forwarded to the correct port.

If an entry in the lookup table is not refreshed by an incoming frame with a specific source address

then it is aged out for a maximum of 304 seconds.

Maximum 304 seconds (default, configurable).

For IEEE 802.1Q VLAN frames, the switch can be configured in VLAN or transparent mode. In transparent mode

the switch does not change any frames or frame TAGs; in VLAN

mode, the switch can be configured to support a variety of applications, such as

trunking or access ports.

The switch will support quality of service if it uses an IEEE 802.1p-compliant frame format.

The switch can support quality of service if the frame format is IEEE 802.1p compliant. The switch can divide frames

into up to four queues, which can be configured as priority queues or weighted fair queues.

The switch uses a 5 V supply voltage, which can be set as the internal RTU power supply or via a jumper.

It can be set to internal RTU power or external power via jumpers.

The components themselves, the Ethernet ports, as well as the SDSL

connections and RS232 interfaces are hot-swappable.

Use the 560NMS24 unit as a repeater for longer distance transmission.