Prosoft ICX35-HWC-A FCC Model

Series IV CANR Enhancements include:

• Up to 12km fiber lengths

• CAN 2A, CAN 2B, and remote frame support

• Expanded DIP switch settings allow selection for CAN bus speeds up to 1M baud

• Enhanced autobaud operation

• Either unit in a pair can Autobaud from the other units defined baud rate

• Improved Reverse voltage protection and CAN line noise immunity

• Increased message internal buffers – Automatic Memory Technology (AMT) operation

• Eliminates the distinction between WRC’s earlier version Type 1 and Type 2 CANR

WRC CAN bus Extenders boost signal levels, allowing longer cable lengths, longer trunk

lines, and longer drop lines without sacrificing network speed.  CAN bus Extenders permit

maximum network speed and throughput on CAN, J1939. or DeviceNet network devices,

resulting in better control of the process.  In addition extenders require no configuration

when used in DeviceNet applications as they are configured for autobaud operation.

The A-CANOR/B can be configured to be either a CANopen Master or Slave allowing the

user to not only integrate CANopen devices into a Logix or Modbus system, but to also

allow the user to use Logix, Modbus, or EtherNet/IP devices in an existing CANopen

network (by using the CANopen Router B in Slave mode). In a Logix system the module

can use Direct-To-Tag technology allowing CANopen devices to exchange data with a

Logix controller without the need to write any ladder or application code in Studio 5000.

The module provides a range of statistics to simplify the diagnostic process as well as a

CANopen packet capture for remote diagnosis. A built-in webserver provides detailed

diagnostics of system configuration and operation, including the display of CANopen

operation and communication statistics, without the need for any additional software.

The ELX3 ProLinx Edge™ Gateway is designed to combine OT Protocol

Conversion with edge computing capabilities to meet your most demanding

Industrial Internet of Things (IIoT) applications.

For industrial protocol conversion, the ELX3 supports the ProSoft ELX-EIP

MBTCP protocol gateway container, giving you the ability to do protocol

gateway conversion for EtherNet/IP to Modbus TCP/IP.  Built on the field

proven ProSoft communication gateway solutions and as an EtherNet/IP

ODVA conformance tested solution, this protocol gateway container solves

many OT protocol conversion needs.

The ELX3 additionally provides the ability to run Docker containers providing

the flexibility to run custom code for advanced applications such as machine

learning, predictive maintenance, or custom protocol drivers.

With hardware supporting an extended operating temperature range of -40C

to +70C as well as Class 1 Div 2 ratings, this Edge gateway is designed to

withstand harsh industrial environments.