H&B Contronic HH 03 module HH 03 H&B Contronic

H&B Contronic HH 03 Module Manufacturers ABB, Hartmann & Braun Model(s)

ABB H&B Contronic Additional Information H&B Contronic XX02 Module

Estimated Shipping Size Dimensions: 5.0" x 1.0" x 8.0" (12.7 cm x 2.5 cm x 20.3 cm)

Weight: 0 lbs 3.0 oz (0.1kg ) HH 03

ABB creates universally compatible multi-sleeve adaptor to help protect wiring in heavy-duty vehicles

OEM-agnostic Harnessflex® Interconnect system from ABB Installation Products works with common types of cable protection

Improves heavy-duty vehicle cable protection with unilaterally effective cable-to-connector stability

Addresses critical connection challenges across global heavy-duty EV market and transport sector

Imagine a heavy-duty vehicle or electric vehicle (EV) grinding to a halt – not due to a battery issue, but because of a faulty electrical connection.

OTHER INFORMAITION

• The operator panel is designed for stationary installation on a planar surface, where the following conditions are fulfilled: 

– no high explosive risks 

– no strong magnetic fields 

– no direct sunlight 

– no large, sudden temperature changes 

• Install the operator panel according to the accompanying installation instructions. 

• Ground the operator panel according to the accompanying installation instructions. 

• Only qualified personnel may install the operator panel. 

• Separate the high voltage, signal and supply cables. 

• Make sure that the voltage and polarity of the power source is correct before connecting the operator panel to the power outlet. 

• Peripheral equipment must be appropriate for the application and location. 

• In a Zone 2 environment, this equipment shall be installed in an enclosure that provides a degree of protection not less 

than IP 54 or greater than IP 65 in accordance with IEC/EN 600079-0. The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into. 

• In a Zone 22 environment, this equipment shall be installed in an enclosure that provides a degree of 

protection not less than IP 64 or greater than IP 65 in accordance with IEC/EN 600079-0.

The IP rating of the equipment is limited to the IP rating of the enclosure it is to be installed into.