Beckhoff EL3443-0020 | EtherCAT Terminal, 3-channel analog input, power measurement

The EL3443-0013 EtherCAT Terminal enables the measurement

of all relevant electrical data of the supply network and carries

out simple pre-evaluation. The voltage is measured via direct

connection of L1. L2. L3 and N. The current of the three phases

L1. L2 and L3 is fed via simple current transformers.

All measured currents and voltages are available as root-mean-

square values. In the EL3443-0013 terminal, the effective power

and energy consumption for each phase are calculated.

The RMS values of voltage U and current I as well as the active

power P, apparent power S, reactive power Q, frequency f, phase

shift angle cos φ and harmonic are available.

The EL3443-0013 offers extended functionality for mains analysis

and energy management.

In addition, the EL3443-0013 comes with the option of transmitting

the time of the last voltage zero crossing to the controller via XFC

technology. This can be used, for example, to carry out switching

operations to suit the application.

The 333 mV current interface is particularly well suited for use with

Rogowski coils with built-in integrator and/or other active transformers.

The EL3443 EtherCAT Terminal enables the measurement of all

relevant electrical data of the supply network and carries out

simple pre-evaluation.

The voltage is measured via direct connection of L1. L2. L3 and

N. The current of the three phases L1. L2 and L3 is fed via simple

current transformers. All measured currents and voltages are

available as root-mean-square values. In the EL3443 terminal,

the effective power and energy consumption for each phase are

calculated. The RMS values of voltage U and current I as well as

the active power P, apparent power S, reactive power Q, frequency

f, phase shift angle cos φ and harmonic are available.

The EL3443 offers extended functionality for mains analysis and

energy management.

In addition, the EL3443 comes with the option of transmitting

the time of the last voltage zero crossing to the controller via XFC

technology. This can be used, for example, to carry out switching

operations to suit the application.